Search:

Type: Posts; User: Philalbar1

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. I've had some ups and downs, but the new problem...

    I've had some ups and downs, but the new problem is the timing advance. . . Truck is running pretty decent, and I've read all the timing advance posts, but the problem came after eliminating the EGR...
  2. Here's an update ...

    Here's an update

    https://drive.google.com/file/d/12hOFHQV02ntZOVu-umOkG8X2Sd0NEV4J/view?usp=sharing
    https://drive.google.com/file/d/1gfwE-Gke7ZI4TJm5XjbnSaAgLW3V_c2s/view?usp=sharing...
  3. EDS, yea man, my first "real" tuning experiences...

    EDS, yea man, my first "real" tuning experiences with cars was on my 1980 El Camino. I fought with that ol' PITA for MONTHS trying to get the carb to act right at idle and WOT. Lots of metering rod...
  4. 57, I got the code from the $E6 page that Mark...

    57, I got the code from the $E6 page that Mark put up, and just followed the instructions. I've got like 9 iterations of bins right now, as I'm trying to get my tune to work with a 5 speed...
  5. 1Project, I was kinda wondering if that "hang" as...

    1Project, I was kinda wondering if that "hang" as you called it, was a "normal" side-effect of the ECM and TBI setups. I might not be doing things "correctly" as a professional tuner would, but I was...
  6. 1Project2Many, you were spot-on with your EGR...

    1Project2Many, you were spot-on with your EGR suggestions. I fixed those two (which were both wrong) and the surging/jerking stopped right away, which left me with the same ol' issue. I bought myself...
  7. Welp. . . Took her out tonight with the $0D tune...

    Welp. . . Took her out tonight with the $0D tune in her, and she idles down and shifts like a DREAM under 2000 RPM, but there is a terrible jerking studder if I hold her around 2000, and she is still...
  8. That's a very valid point LOL, I didn't look at...

    That's a very valid point LOL, I didn't look at the 92 ECM that hard, and I've been running on about 5 hours of sleep since Saturday. I think I posted a pic of my memcal on the previous page, but I...
  9. Thanks Stew, I actually found an updated e-fan...

    Thanks Stew, I actually found an updated e-fan code just down a couple posts from your referenced post #8. I appreciate the help there. That keeps me from having to mess around combining masks and...
  10. Okay, thanks! This may be a stupid question Jim,...

    Okay, thanks! This may be a stupid question Jim, but do you think I could still use my e-fan "mod" that comes with the $E6, or is there one for the $0D? Can you mix and mash between two masks on the...
  11. I'm to the point right now burb, unless someone...

    I'm to the point right now burb, unless someone needs this 16144288 ecm for a stock 92 S10, and it could help all of us (potentially) by grabbing the .bin file, I'm down to desolder it and pull data...
  12. Wait a second, the ECM that came out of the...

    Wait a second, the ECM that came out of the transmission donor truck is an ATAR (16144288) ecm. It also had a TBI 4.3. . . Have I just been being an idiot this whole time? Could I desolder the prom...
  13. Understood. I just wanted to make sure. I have...

    Understood. I just wanted to make sure. I have become vaguely familiar again this evening with the compare tool in TPRT. I tried setting some of the idle values down, and it helped a little for RPMs...
  14. So. . . I took the truck for a ride around the...

    So. . . I took the truck for a ride around the neighborhood tonight, and I was wondering if anyone could look this recording over and see if anything sticks out that I could adjust to get her to idle...
  15. Where in the realm of impossibility can I find...

    Where in the realm of impossibility can I find these magical compounds my fearless leader??? Please guide me in my quest! :laugh:

    I'm honestly at a loss at this point (again) as to how to proceed...
  16. I just used TunerPro RT to read the factory prom,...

    I just used TunerPro RT to read the factory prom, and this is what I got. I don't know if it's any different. If you think it's still a read error, I would like some instruction as to how I should go...
  17. I also got pictures of the build codes just in...

    I also got pictures of the build codes just in case you were interested.
  18. Well darn, that's unfortunate. Hopefullly I can...

    Well darn, that's unfortunate. Hopefullly I can find a manual trans bin that will work somewhere. . . As to the file I uploaded, it was directly off the chip that was in the ECM when I bought the...
  19. Is there another way that I could try and get it...

    Is there another way that I could try and get it to you? Would it be easier if I copied it through TunerProRT? I don't think I damaged it when removing it from the memcal. . . I made my own adapter...
  20. I'm hoping I got this right with Flash&Burn, but...

    I'm hoping I got this right with Flash&Burn, but if it's not, I will keep trying. . . I selected the 27C512 (Read-Only) chip and copied the buffer into this file: (First time trying to upload an...
  21. 1Project, That's what I was finding, and trying...

    1Project, That's what I was finding, and trying to locate the MemCal that fit my cluster of an apparent Frankenstein was proving more than difficult. I came to the same conclusion on the M30 trans,...
  22. I just pulled some BCCs out that matched what I...

    I just pulled some BCCs out that matched what I had started looking for when I started trying to tune this mess way back. LOL I punched my Vin into the tis2 and came up with EXACTLY what you came up...
  23. That's what I was afraid of. I know that the 93...

    That's what I was afraid of. I know that the 93 was a bastard year that flipped between the 4L60 and 4L60E. I think they made a lot of changes since the electronically controlled trans needed to...
  24. 1Project2Many, Thanks for replying, but I...

    1Project2Many, Thanks for replying, but I misspoke on that initial post. I have tried the BCPM bin in the past, and have run into lots of little problems with the California edition having all the...
  25. Help with a 5-speed swapped 93' S10 8625 $E6 Vin "Z" TBI 4.3

    Hello everyone, I have a 93 S10 with a TBI 4.3 V6. The 4L60E crapped out and I was able to buy the truck super cheap! I haven't had the best of luck with GM autos, so I also bought a 92 parts truck...
Results 1 to 25 of 27
Page 1 of 2 1 2