Right on, I figured I would just leave it alone. Thanks for the response.

Is the a reason why every stock bin I have looked at is set to 1199.77rpm? Would I benefit from lowering this value to something more reasonable, like say 500?

Right on! Will do! Thanks

I believe the IAC is working, I can watch the step count and it does react, and I can hear a change in the sucking when I jab at the throttle. I have also placed my finger over it and can detect the...

I can use a v-8 bin correct? I need to change the number of cylinders to 6 right? I'll see exactly which injectors I am running. Thanks for your suggestions!

This is why I love this site! Everyone here gives straight forward answers. I should have given more info on the engine in my earlier post. Here is what the engine is: .060" over 258 block, the cam...

I was having trouble downloading bin a while ago but with your help I got that figured out :happy:.

I burned the APAB bin to my chip and set my timing, and my IAC steps to 40 with an idle speed of...

Son-of-a-gun! That worked too! THX

Alright, that's kind of what I am leaning toward. I am wondering if it isn't the chain, I have locked out a second dist, problem remained, and had the module checked at Oreillys and it was good.
...

I will check it out!

Thanks! That did the trick. IE was the problem!

Thanks for the welcome Dave!

It is 7747 that has a chip adapter from moates and I have the Flash and Burn. I have not messed with it for years because it ran really well. Rarely opened the hood....

Hi folks! I went to register and it said the email was already linked to an account. But I forgot the password and that would have been YEARS ago. So here I am again!

I built up a AMC 258 and have...

Didn't realize this was my first post. Been on here before I thought? Anyway Howdy!

I have tried to download a 4.3l 5spd file APAB to use on my AMC 258. When attempt to download it is a .php file and not a bin? What am I doing wrong? Also I plan on using my moates Flash and Burn to...