I'm using the "Manual Trans" bit set to one (checked) in $0D with a TH400 (with no P/N switch) - seems to work well.
Type: Posts; User: d0nk3y
I'm using the "Manual Trans" bit set to one (checked) in $0D with a TH400 (with no P/N switch) - seems to work well.
Gah.
What a mess. All of my problems: a faulty APU1/AutoProm setup. I've been spending the days taking data, making changes and burning a new cal using a Pocket Programmer. My Moates tools...
While I agree with most of what was said above, the increase in fuel economy comes more from the reduction in pumping losses than with an increase in spark advance. I cannot share any "Actual" data,...
Took tonight off.
We're having a Christmas chili cookoff on Wednesday, so after making dinner, I started on that. Then I switched guns on my plasma cutter and made a winch mount for my garden...
I'm curious - when setting the "MaskID" to "AA" to disable the checksum - is there any way to validate it worked? I would enter AA, "save", "upload to emulator" and still not have any luck.
I'm very happy you did! :)
Your hard work is appreciated. :thumbsup:
I'm going to call Moates tomorrow.
The dang thing won't even work with the original 7747 that I did my initial calibrations with. I think my emulator has failed, or does not like the cold...
http://www.gearhead-efi.com/gearhead-efi/def/
PCM "off"
Mask ID == AA
Bin saved
Bin uploaded to emulator
Key on, and get the following result. (along with nothing running correctly)
Damn program.
Any time I try to load a acquisition def file that has things like "TP5 V250" in it, the program locks up while using 100% of the CPU and doesn't come around after 10 minutes of deep...
I will check this out - more info I was unaware of!
When I first started out in "industry", I worked for Mitsubishi on a joint project with Chrysler calibrating the Talon / Eclipse 2.0L A588 engines (circa model year 1996). We used an "Interrogator...
Whoops!!!
Some searching around located exactly what I was talking about!
Pardon my ignorance! :wtg:
Hosting websites, administrating them and fixing problems/migrating old data does not automatically happen, nor does it happen for free (time IS money!).
So, from what I see here, the persons...
We may not be big enough (?) or have enough private sales happening through the site, but my recent (excellent) transaction with Jeepsandguns made me wish I could log some sort of feedback for him as...
I appreciate all of the help! :) There are a couple of things I tried w/o thinking - just because I have about 20 years experience with fussy data acquisition and windows. :laugh: I disconnected /...
well, well, well.
I'll have to give that a look-see in the morning! Thank you for sharing!!!
Well,
I had limited success today and I'm really confused now.
Got the 16197427 to work today...sorta. When emulating, the data acquisition (and the controller) only seemed to work if the BIN...
Dang - I didn't realize the autoprom doesn't burn AM29F040 chips. :(
Thanks Mark!
It still took me some time to look at the pictures on the site and doing a google image search, plus your instructions, to finally get it through my thick skull!
The CTS (sorry, we use "ECT @ work :D ) is functioning correctly when the 7747 is plugged in and logging. What adapter is the correct one from moates? I couldn't tell from his documentation on the...
Update.
I don't have a datalog to post, but something just isn't right with what I've done. This is what I have:
16197427 controller, BJXL ($0D)
necessary $0D bins, definitions, acquisition...
sending you a pm... :)
Good question! I have also found some info on another website that claims it is hit-or-miss with changing the Serial data line.
Hey- I was getting ready to contact you - did you get the money I...
Thanks!
I also spent a few hours measuring the cam profile on the engine I'm working on; looks to be fairly close to a comp cams 260H with around a 105 degree LSA. :nono: That helps explain the...