Does anyone have xdf for this 16143151 ecm?
Type: Posts; User: sbc350
Does anyone have xdf for this 16143151 ecm?
http://www.cruisingnight.fi/images/stories/garage/projects/s10-blazer/romulator.jpg
I have this Eprom emulator and trying to find out how to fit it in my tbi box. Is there an adapter to fit the...
Changed the chip from my other box and plugged it in, started right up..
Just wondering are these boxes the same, just different bin files? 151 is from '90 4.3+700 4x4 blazer and the 062 from '88 2.8+manual 4x4.
Will the 151 box work with the 2.8 if I just swap the eprom...
Does anyone know where I can find the BPC setting in the 4e?
edit:
Found the minimum BPW, minimum Async BPW and maximum Async BPW, how does these settings work?
Trying to figure out how to...
I'm using redline e85 additive to keep the injectors and fuel pump alive, been good for 10k miles now. Drove the whole last winter too, I use electric engine heater at home and work so the engine is...
Yeah it needed more, 28ms did the trick!
edit: I figured it needed more since the start point was zero..
"Async pulse coming out of DFCO" Is this extra fuel injected when the fuel cut is coming back to fuel at low rpm? Having stall problems while decelerating and pushing the clutch, engine will stall. I...
I got the data from the original chip. I had the voltage set too high..
Bought this china eprom programmer and managed to program a chip with the .bin I downloaded. The car starts and runs with it but seems to run richer than with the stock chip. The stock chip is ACJA...
I painted the car, changed the clutch, driveshafts, made custom bumbers etc. Now is time to start the ecu tune finally.
...
Yeah it's the gasoline price here in finland. I save 0.3-0.4e / liter when driving with e85.
The engine has 257k miles on it but runs great tho. But if it ever needs overhauling I will
update the...
Thanks for the info!
The 4.3 body is a bolt on, but you need to enlarge the intake manifold holes a bit.
http://www.cruisingnight.fi/images/stories/garage/projects/s10-blazer/4-3-tbi5.jpg
...
Hello. I'm currently learning about the GM ecu tuning. I converted my '87 2.8 v6 5sp blazer to work with e85 fuel. I installed 4.3 throttle body
to get bigger injectors. Also disabled the stock fuel...