Thank you so much
That is basically what I needed to know. I did go back and look at some older logs an it was doing it on those also, and wasn't setting the code. I can't tell when it does it so it...
Type: Posts; User: Snowwebs
Thank you so much
That is basically what I needed to know. I did go back and look at some older logs an it was doing it on those also, and wasn't setting the code. I can't tell when it does it so it...
I keep seeing a blip on my IAC.
It goes to an "IAC rest in progress" and an" IRC reset request", the motor position shows a jump from like 80 to around 256 and at the same time the desired motor...
Hey guys,
I replaced my transmission and when I put it back in I got an IAC code that I never had before and the computer is not sending a lock up command.
I have 5 volts at the aldl connector...
I would imagine that a dif file manager could find the files.
The way I got into them was to hook it to my computer, you can access all the hidden files that way, just start from my computer, then...
That is the path I tried to use, and is still valid on my old phone. But with the new one it will only go as far as data, there are no files in that folder, where my old phone was full of files. So...
3400tZ. So, I love your Aldldroid program!!
Works great for data logging and easy to use, Thanks so much!!
I changed my phone from a 10e to an android version 11 galaxy a32 and everything worked...
I just re-loaded everything. So much better!!!
Thanks Again!!:thumbsup:
There were five Dat Files in there.
I deleted them all and re-opened TP. All My setting are gone but my single utility window is back and the tabs are there!!!
Thank you so much!! :rockon::jfj:...
So a while back, I had the dashboard, history tables, and monitor up. While they were open I changed back to the main TP window, and under view settings, (top left corner) I clicked on either...
Well that's a little discouraging!! LOL.
I can drop ten psi of fuel pressure with the swap, but tuning has been interesting. BLM numbers never really calms down.
I thought the $31 mask was only used in 95's?
I found a 7.4 bin for an $0E mask but it had the same offsets as my $31, from what I can tell the earlier 7.4 were either a $42 $4f $99 or a $85 all of...
OK so I ran $42-1227747-V5.9.3 to see the bin, I didn't see injector offset, but I did find injector correction multiplier. do I just use that table somehow to modify mine?
I'm running - Advanced...
Thanks so much Dave!!, I believe that is just what I needed. I figured the information was on here some where I just could not find it. :rockon:
Anyone have the offsets for red/blue 5235231 80 pph injectors?
I swapped them in as a replacement for the pink/purple 17104288 46 pph ones after a stroker build.
I'm on the move right now, but Yes I would love your help. I'll get some info together and PM you later today. :thumbsup:
My base timing (mechanical) is at 4° (stock setting unpluged) and the "initial spark adv" setting is at 3.9, I set both the idle and open throttle main spark table to run 7° @ 600 and 800 rpm and at...
So all I do to change BCC is basically, match the new bin parameters against my original and burn it to the chip as long as it is compatible with my computer, Right?
OK I went and got those files, I haven't tried any of the ADX files but, my spark table looks right and I have data in the VE files now!!:jfj:
I am still curious as to why to change the BCC and...
OK, Ill go find those and try them, :thumbsup:
I'm not against changing the mask or the bin, I'm just not sure why, or how to do it.
I see you have used a BHDF and a BMHM then back, why did you...
I'm guessing from what I know that it is a $31 now?
If that is right, would it be better to change it to the $0E or will the $31 work?
If it is a $31 now, what is involved in changing it over to a...
I have a 95 7.4 HD 2500 with a 4180E with a 16197427 BMHM, I copied the original bin file from the factory chip.
My main problem is I can’t seem to find a XDF file that works correctly.
...
I forgot to add the BMHM to the bin name. so if you use it you may want to add it.
Thanks Ken
Hey Dave
I got home back early and copied the original chip as a 64k file as per your settings, the truck would not run.
I opened the chip in the hex editor and all lines of code were 00 80 00 80...
Thanks so much for your help.
I wont be with the truck or burner untill sunday. Untill then I'll try and do some more research. Knowing how, will help me learn the why.
Thanks Again, Ken
Thanks for your response Dave,
So when I read the bin file off the original chip, the chip setting should be 27SF512?
And I'm guessing that should make the bin file size 64k? Then I just set the...