I had tunerpro installed as well, I went ahead and downloaded the xdf package and found the tab exactly as you labled them.

got it, I was using universal patcher thats why ! ill look into those table in the morning, definatly a lot of data to digest. Realy apreciate you helping me out. Just blew my 350 on my k2500 and...

what does 'ho104 tos' stand for ? I found the pulse per miles setting but not the other one

hey man thanks ! ill try this out and let you know, merry christmass

3.42 and 215/70 r15 (26.85 inch.) but yeah I will need some fine tuning, its shifting a bit too fast at low throttle, and I know very litle about tcc lock and all that stuf so I need to comfirm that...

it was indeed the pink wiring powering the trans that did not have 12v on it, I supose it take it from somewhere else I didnt power up in the harness, then I got the speed sensor to read something as...

there it is

is there a way to to segment swap the trans config from a 1998 bin ? I know there is some on the site but I dont even know if its compatible with tuner pro

just came across this, look like minor difference in 2002 vs 98 4l60e ? could that be an issue ?!

https://www.sonnax.com/parts/4111-remanufactured-valve-body

I guess it depends what you wanna do, gotta consider all that ckp / cam correlation that vortec engine use.

yeah I checked fuse, and the ecu is scanning properly and monitoring rpom and tps like it should so Im assuming this is good.

Trans is unknown, but throwing out every single solenoid and tcc...

I beleive im at none atm, I can send you the whole bin if u wanna take a look real quick. im sure something must be going on in there, its definatly going into limp mode because every code triggers

yes i am using tuner pro, and I basicly only modified the least possible so it could workm like vats, axle abuse and engine dtcs

yes I do and it seemed close enough. hard to verify while driving and the truck speedo not working because there is no tv cable hooked up lol. but it looked like it was accurate.

I cant anwser that question but somehow I do have some kind of rpm reading on my scanner. if im not mistaken, the rpm signal is only for wot shift ? but adding the tach signal made it go into first...

yes exactly, 4l60e seems to be from a 98 truck acording to the number on it.

what im not sure besidew the programation it self is if the rpm and tps are compatible even tho my scanner give me a...

my setup is a 88 astro with a 4.3tbi, 1998 4l60e origin unknown and a complete harness with ecu from a 2002 blazer.

so far I have installed everything and modified the bin with tunerpro to remove...

Mandatory hi, currently in the process of my first tuning attempt, starting with a 411 swap on my 97 5.7 2500