Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!

Search:

Type: Posts; User: Six_Shooter

Page 1 of 4 1 2 3 4

Search: Search took 0.04 seconds.

  1. Thread: Stock PCM

    by Six_Shooter
    Replies
    4
    Views
    389

    Doesn't Holley have a trans controller, that will...

    Doesn't Holley have a trans controller, that will link to the Sniper? I think I'd do that, so that the ECU and the TCU can communicate with each other and not need extra sensors.

    You do have a...
  2. The macro fix is only for the data logging side,...

    The macro fix is only for the data logging side, it should have no effect on the emulation side.

    Another thing you can try is uploading the entire bin when change things instead of each individual...
  3. Emulation is not inherently glitchy, once...

    Emulation is not inherently glitchy, once everything is set correctly.

    The biggest thing you have to do is disable checksum, by changing the MASK ID in the bin to AA. This goes for all OBD1 GM...
  4. Replies
    24
    Views
    1,282

    The picture looks fine on my PC. *shrug* I...

    The picture looks fine on my PC. *shrug*

    I don't recall the exact dimensions of the notches, but it was basically made to be very close in size to the original crank wheel, to avoid any errors in...
  5. Replies
    24
    Views
    1,282

    This is what I did on my 1985 Jimmy originally,...

    This is what I did on my 1985 Jimmy originally, then the wheel was transferred to my Nissan L28 (I used GM EMS and DIS on it) and then onto my LX9, where it is currently.

    I did modify the sensor...
  6. Replies
    7
    Views
    1,199

    I have PM'd you.

    I have PM'd you.
  7. Replies
    7
    Views
    1,199

    Crossfire EPROM

    Crossfire EPROM
  8. Replies
    7
    Views
    1,199

    ECMs, ECMs, ECMs...

    I have FAR too many ECMs in my possesion and need to move these onto people that can use them.

    I can (probably) include a MEMCAL with each ECM, just let me know what it is you're working with, and...
  9. None of the vehicle functions will be affected,...

    None of the vehicle functions will be affected, except possibly the cruise control, I'll have to look up the wiring diagrams to refresh my memory. Even if it is, there are easy ways around that.
    ...
  10. Have you set the preferences in TP RT?

    Have you set the preferences in TP RT?
  11. Replies
    3
    Views
    567

    One way is to manually edit the bin file and then...

    One way is to manually edit the bin file and then add new items to the scalers tab to be able to edit them like you would anything else, but there is an XDF that has the patch built in along with the...
  12. Thread: MEMCALs

    by Six_Shooter
    Replies
    2
    Views
    797

    We have a forum way down at the bottom for this...

    We have a forum way down at the bottom for this very thing...
  13. Replies
    12
    Views
    1,545

    ALDLDroid uses Tuner Pro files and has a...

    ALDLDroid uses Tuner Pro files and has a customizable dash.
  14. Replies
    2
    Views
    708

    Both ECMs originally used 24 pin PROMs, 2732s,...

    Both ECMs originally used 24 pin PROMs, 2732s, there's also mention that they had 27128, 27256 and 27512s installed, but the 2732 is most common.

    Most user programmed EEPROMs will be the SST...
  15. Replies
    17
    Views
    3,877

    You will need to use a BIN that matches the PCM...

    You will need to use a BIN that matches the PCM you will be using. The '7747 BIN will not work in the '7427.

    There is a thread dedicated to the '7747 ECM:...
  16. Thread: Need help

    by Six_Shooter
    Replies
    5
    Views
    1,100

    The detect emulation hardware button is for...

    The detect emulation hardware button is for emulation equipment only, the ALDL cable does not fall into this category.

    You need to setup the datalogging side via the preference tab.
  17. Thread: Need help

    by Six_Shooter
    Replies
    5
    Views
    1,100

    Ok, just to verify, since you're description is a...

    Ok, just to verify, since you're description is a tad confusing, or maybe just not clear...

    When you say you "plug in your diagnostic cable", is that the one that connects to the ALDL, or the USB...
  18. Replies
    6
    Views
    1,337

    I don't have a way to UV erase. I had thought...

    I don't have a way to UV erase. I had thought about programming an EEPROM, but that won't solve the problem I have. It runs off the MEMCAL, it just runs very rich, due to the larger injectors with...
  19. Replies
    6
    Views
    1,337

    Well, I'm finally stumped... v.WTF?

    Well, today I went to tune an '89 Cavalier with a hybrid (frankenstein) 60 degree V6...

    Engine looks to be well put together, and the owner has taken a lot of time to make it a very clean install....
  20. It's a way to identify each BIN. GM used these...

    It's a way to identify each BIN.

    GM used these 4 letter codes (along with a 3 letter code that is pretty uncommon and early and occasion number codes). The letters themselves don't say anything...
  21. Replies
    4
    Views
    1,480

    Typically the ADX needs to be modified to...

    Typically the ADX needs to be modified to calculate WBO2 data correctly.
  22. Replies
    24
    Views
    4,981

    My bad, I read it originally as you had a second...

    My bad, I read it originally as you had a second ECM.

    I would still go over the harness, since it seems to be the last thing in question. I'm not saying that you did anything wrong with it, but...
  23. Replies
    24
    Views
    4,981

    Easiest way is to swap the ECM for a known good...

    Easiest way is to swap the ECM for a known good one.

    You can also buy engine simulators to connect to the ECM to bench test it and observe the diagnostoc data. I use a JimStim for this, that is...
  24. Replies
    3
    Views
    1,263

    The best way to do that would be to block off the...

    The best way to do that would be to block off the existing IAC port and plumb the other IAC around the throttle body.

    The GM IAC has the pintle actually seat inside the TB, whereas the Ford is all...
  25. Replies
    14
    Views
    3,056

    Nope, not an open loop tune, that's not how you'd...

    Nope, not an open loop tune, that's not how you'd do it anyways...

    This has been known for some time that there is a particular "tooner" that does this.

    I just don't understand how people can...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4