Update again, its been fixed for a while now. I thought the ecu was the fix, but after hp tuners i still had constant issues. After alot of digging, logging, and diagnosing, i decided to throw a ckp...
Type: Posts; User: blakebird93
Update again, its been fixed for a while now. I thought the ecu was the fix, but after hp tuners i still had constant issues. After alot of digging, logging, and diagnosing, i decided to throw a ckp...
Update for the curious. Reflashed with my gm tool both my ecus to factory via gm tool. The 896 still had issues. My 0411 for fun, threw it in. Darn near ran perfect without a tune. Threw my tune in...
Well i decided to move away from all that and did a full write of a manual car. Same results based on that pin 34 input. I think im gonna wait and see how my 0411 acts with Hpt instead. Im kind of...
No i didnt bother segment swapping when i have the ability to totally full write an ecm with oem procedures.
Yeah ive been searching and searching. I could understand one of those tables causing a change from 14.5 to 16 afr in gear. But not so extreme to go full lean.
Maybe my p01 im using isnt correct...
Anyone have thoughts on this. It goes extremely lean, only when the scanner pid goes to "in gear" and i verified its not related to ve hitting a bad spot by unhooking the park position switch so the...
I have a buddy who tunes these cars after the swaps and he said turns off the follower so it doesnt try to stall and they work fine.
I think at this point itll be less effort to go manual file and tune accordingly. Converter is a little on the loose side so im sure itll be tunable
So its possible to segment swap to a non electric auto so it only uses the pnp switch?
So i cant simply check the parameter for non electric auto?
If the current auto file wont work or will cause issues down the road ill reflash the whole ecm to a manual. I dont have the means to...
93 firebird auto (non electric early 4l60)
Using an 0411. Was told by some that an auto os is the way to go cuz the pnp switch and vss inputs can help with in gear idling especially with a cam and...
Yeah i used to use scan9495 for my 93 and trimalyzer was real.slick. wish there were similar free softwares for data logging obd2
Yeah dont think i can use the mdi to log with in tunerpro
Here i am over Thinking stuff again... I had forced it speed density, did everything correct. Except one thing. I disabled the dtc processor for maf, not the mil only. Well if the maf codes are...
I found the open loop table you talked about. In that xdf its open loop commanded fuel. Everything looks normal no lean spots
Just a snap on scanner to check on things no actual logger yet. Trims are zero its open loop and they get reset after the flash.
Maf is failed yes, my car is a 93 and never had one so i didnt want to buy one. Plus ve makes more sense to me. I dont see commanded afr. Its gotta be some kind of after start decay or maybe its...
No this is open loop, i dont even have heated o2s yet.
So i itially i used the factory Ls firebird calibration. All i did was adjust commanded idle rpm to reasonable levels for a cam. Started, took a bit, then idled fine around 11 afr. Too rich...
In the summer its both. Im.having a heck of a time making it idle and work properly. The sheer amount of tables and modifiers that im not used to from obd1 is just insane. Almost tempted to buy hpt...
Its a 93 firebird lt1. Has a torqhead signal kit 24x/1x. Using a 0411 pcm to run it. Built my harness myself since torqhead doesnt make a plug and play harness for 93s. Efi connection does, but its...
Holy crap im dumb lol. I had a manual file saved as a similar name as the actual auto file from my car... Soo its fixed.. Xdf works great. Appreciate it big time!
It worked, but i still don't understand why it thinks its a manual trans. I flashed the p01 at work (im a dealer tech for gm) and used a vin with an auto and tunerpro thinks its manual when i load...
Awesome! I mean if it works and i can navigate it well without issues yeah ill stick with it. Just wanted it to get the car to idle normally for now until i get hpt. Well see how it goes ive found a...
Thats ok ill give it a try. I havent purchased hpt yet. But i have 2 p01s. One im going to use as a test mule for tunerpro until i get hpt. So if i brick it i dont mind. I found a few xdfs so far but...