16121I picked up a Drac module and I will modify it with a set of dip switches.
I found a little time and removed the trans cover. Here are some pictures that were taking.
vandyman1611816119
Type: Posts; User: vandyman
16121I picked up a Drac module and I will modify it with a set of dip switches.
I found a little time and removed the trans cover. Here are some pictures that were taking.
vandyman1611816119
Dave you have me a little confused.
When I say VSS, I am referring to the transmission input and output sensors. (only the output is needed?)
I am using a GPS speed sensor for my after market...
WOW! Thanks for the info Dave.
I went out and grabbed some quick pictures.
The VSS id is 24203876, Which I believe is the 94 and up.
The outside of the trans needs to be cleaned, but the inside is...
I need to make clarify a few things from my main post.
The 4L80E was replacement for a 1993 G30 Van. The transmission is an updated GM Goodwrench with a 1995 date on the tag on the side of the...
In-Tech,
What is it that you do not like about the MSD TCU ?
The MSD Atomic TCU has a lot of tuning parameters. I will most definitely stay away from the older MSD TCU.
THX, vandyman
Thanks Dave.
I did all the work on my Monte myself and used all good parts. So I will go with the MSD unit.
There is no sense in being cheap now. Lol..
I may have some questions on tuning my...
I have been doing a bunch of reading about using a GM ECU as a stand alone transmission controller. The information that is out there is old and vague, not links, etc.
I have two 94 - 95 16197427...
I have the same TCM with a AXNA chip. The unit is out of an 93 van. And I also have the 4L80E trans and harness.
The transmission has a Goodwrench label on it, so that tells me that has been...
Hello to all,
I am from S. Jersey and happy that I have found this site.
My current Hot Rod is a 86 Monte Carlo with a ATK crate 355 (395hp/425tq) with a MSD Atomic EFI.
Transmission is aTH400,...