Would like to purchase it. How do I get payment to you for it? Please advise. Thanks.
Type: Posts; User: rsicard
Would like to purchase it. How do I get payment to you for it? Please advise. Thanks.
Dave: Another subject. Have you been able to record with TunerPro when emulating and data tracing with the Ostrich? When I try it with the APU1, the DA drops, then when reenabled (Double opposing...
Dave: Again, thanks for the reply. I just need to absorb your posts and get out there and try that spreadsheet method. I am guessing that asking TunerPro to data trace and record at the same time...
Dave: Again, thanks for the reply. Need to study what you have sent. Don't understand off-idle spreadsheet is partially populated, must be filtering and sorting in Excel. Did not realize that...
Dave: Are you using TunerPro RT with the ostrich? If so, what display parameters, besides VE or igntion tables, are used on the Tunerpro screens to tune V8 engines? There must be a way to tuner VE...
Dave: With TunerPro RT, are you able to emulate, data trace a VE table and record the data all at the same time? With the APU1, I have tried that and when enabling data record, Tunerpro drops the...
Dave: Again, thanks for the quick reply. Just did not look (my fault) for additional Excel file sheets. Will also pay closer attention to each of the files supplied. What is the emphasis behind...
Dave, thanks for the quick reply. Yes the .zip file was opened. The .xls file has the parameters, yet very few of them. Can't reason how the bin file modified with these parameters is able to...
Dave: Is there a 16197427 0D MPFI BJYM like binary file available to download? Please advise. Thanks.
I have a Holey 4 barrel EFI manifold. Takes bosch style injectors. Put a 4 barrel throttle body on it. Put 42 lbs/hr injectors in the manifold. It is a 383 stroker engine with LT-4 hot cam. ...
Dave: Am converting a Chev '95 350 to a 383 engine with Port Injection Manifold. Have tied the left bank and RH bank injectors into two connections along with +12 volts for the other side of the...
Dave: I agree. Have tried to work my way thru Log Works. Found it user un-friendly. Did not pursue it any further. Still learning Tunerpro. Thanks again.
Dave: That is exactly what I did and got similar results. Finally getting better at this stuff. With the quality of the AEM 30-4110 gauge, likely will send it back to Amazon. Has the Innovate...
Thanks Dave. Had already used the setup parameters you posted. Will use the selection that you chose for the history and run once again to see what the results are. The AFR voltage is going in on...
Dave: Attached are the requested files. Thanks.
Dave: When you are tuning for AFR with the Ostrich and Tunerpro, what is selected for display other than fuel VE table. Have finally gotten the data tracing to work. Have tried the history...
Got data tracing working.
Got the data trace working. Next run is to add emulation. In addition to data tracing VE table, for AFR, need to know what selection should be made to faithfully display AFR at the same time as...
Need some advice on data tracing with emulation with WBO2 on EGR A/D input of 7427 ECM. Beside having the VE table on screen, is it appropriate to have the AFR history table on the screen at the...
Interested in the DRAC modules. How much for all of them? Do you do PayPal? Please advise. Thanks.
Cannot get tunerpro to properly display data tracing. Have set up X and Y axis as per instructions. Set up DA per instructions. Tried 2 different selection to sync up XDF and ADX in DA. Still no...
Need more close up photos especially, 7427 ECM and its BCM, ECM connectors with pigtails and DRAC modules. Remainder of stuff is worth very little.
Will have to review Dave W. writeups concerning AFR history table. Hopefully, that history table gets updated as the VE table is change to see the effect on AFR.
Is there a method of having both VE table and AFR displayed on TunerPro RT such that when emulating the EPROM the VE table can be modified to adjust AFR to a desired value? Can VE table and AFR...
The APU1 was designed with Static RAM as the storage media, not battery backed cmos RAM.