both have baffles, one at the non-PCV and one at the PCV, have not restarted since installing vac gauge. Vac should be very low considering cam. Will find out.......thanks

thank you, will look into that :-)

disregard about intake oiling, going to vented vs PCV

572RB with 572-13 heads that require oiling plumbed thru valve covers. My intake is showing signs of oil, am reasonably sure is due to PCV sucking it? any tips or ideas how to eliminate. Can not use...

have looked, not found wanting a cold plug .750 reach/14mm/ non-projected tip with resister 5/8 hex can find some with larger hex, want to stay with 5/8 not hardcore about brand any suggestions...

All new pump 18310 was sized to fit in 66 Charger tank 8" dept. Wiring Harness still in unopened box 16307, regulator 1303 no fittings. also have 2 gauges and a filter, will look for part numbers...

thanks to all that replied :-)

any users of E-85. just looking for feed back on anyone using E-85 for a year or longer, starting in winter? how consistent is it far as % of if you check regularly ? thanks for any useful replies

Had them flowed already before installation:-) Actually have a dual phantom Areomotive so plenty of pump. Took their advice on the fuel supply etc. so hoping for the best :-) few hours of wiring and...

Distributor set-up seemed obvious, but won't know till trying to start. thanks tho fo the potential PITA :-) I am mostly looking ahead for any situations I may need help with. Just finished the...

Looking for anyone willing to offer advice and help on installing and programming a FAST multiport 303000, thanks in advance

Thanks, I done a lot of research concerning Holley Fitech etc as well as FAST, went with them mostly due to lesser complaints overall. Certainly long from knowledgably about the FI bizz in general !!...

Putting a 66 Charger back on the road, not original. Have upgraded(hopefully), can be called that. Been an ole school car guy 60 yrs now am 74. So carbs and original ignitions till now. Although did...