Search:

Type: Posts; User: Aksl

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Hello Nisanda, I have used the .cal file you...

    Hello Nisanda,

    I have used the .cal file you have uploaded for me "2001 Truck 5.7 L31 4l60e 4x2.cal" in post 57 of this thread, and i have installed a new 4L60E transmission id: 8KCD283L 20820533....
  2. Need some info..

    Hi everyone, i wonder if anyone has a pinout of the connector C200 for a 1990 k1500 tbi, i have joint some wiring of the c200 in cabin connector with the under hood vortec 1998 wiring, but not all....
  3. Ok, let me report on my problem, i found what was...

    Ok, let me report on my problem, i found what was causing the extreamly high idle.
    I noticed that my TPS value is 25%, but i have a cable driven throttle body, so i checked the accelerator cable...
  4. Thank you for your advice, will check it...

    Thank you for your advice, will check it tomorrow, hmm, i didn't think of that! :thumbsup:

    I will as well double check the pcm connections, but normaly, since i used Lextech's swaping chart that...
  5. Still high RPM (((

    Yesterday connected the tech ii scanner, well first - therd engine start, the engine idles at 1400 rpm, but in about 30 sec shut, i have to apply the accelerator to keep it running, but it still...
  6. An update on my scaning, today i have performed a...

    An update on my scaning, today i have performed a live scan, i have uploaded the vid to youtube, here is a link: https://youtu.be/eqPkJdlSkrU

    Well, on this video, it was not the first start of...
  7. Hello NISANDA, Thank you for your reply! The...

    Hello NISANDA,

    Thank you for your reply! The DTC_CNT is 6.12521

    I have a total six fault codes, with the engine stall, wanted to perform a live scan, but my battery died, have to charge it now....
  8. Lol, which one, they are all green... :happy:

    Lol, which one, they are all green... :happy:
  9. 0411 swap done!

    Hello to all Fuel Injected Gearheads,

    Thank you all for taking your time, to get acquainted with my project, explaining things to me, advising and helping me!!!

    A special thanks to:

    Lextech,...
  10. 2018!

    Marry Cristmas and a Happy 2018 New Year everyone!12458
  11. 0411 swap wiring sticker labels for print out.

    Hello Jeff, and everyone,

    I`m slowly getting ready for my 0411 swap, and the thing is, I’m going to change the pin contacts for new ones (solder new pins on each wire).

    So for that purpose, I...
  12. Hello Kacy, well not exactly, i used the plastic...

    Hello Kacy, well not exactly, i used the plastic vortec cap of a 1998 tahoe, with crank position sensor, same tahoe the heads came from.

    Let me edit my post, in order to fulfill the answer: I...
  13. :thumbsup:

    :thumbsup:
  14. Hello Nisanda, thank you very much for providing...

    Hello Nisanda, thank you very much for providing me with the tune file! I will study it and use it for my 411. I'm just starting to get around the tuning process, and for now studying all the info...
  15. No, it`s a 350 EFI 1990 engine, with L31 engine...

    No, it`s a 350 EFI 1990 engine, with L31 engine heads, manifold and all of the top end is from L31, as well as the wiring under the hood and black box pcm, that i will be swapping to 0411.
  16. Hello Nisanda, I have rebuild the engine,...

    Hello Nisanda, I have rebuild the engine, installed KB 0.25 forged pistons, comp cam 08-467-8, 1998 tahoe cylinder heads with manifold and all upper parts, AC DELCO 217-3029 89060440 spider injector...
  17. Hello Jeff, Finally i got the TunerCat RT...

    Hello Jeff,

    Finally i got the TunerCat RT software instead of EFILive, because in order to buy the EFILive license, you are obliged to have the EFILive V2 cable and tuner, otherwise EFILive would...
  18. Hi guys, so finally i got the diff files,...

    Hi guys, so finally i got the diff files, installed them (well, unpacked to the directory on the program). And got the TC RR Tuner software working. So now I’ll be looking for the most close to my...
  19. It's strange, i did not get any reply from...

    It's strange, i did not get any reply from moates.net, but i have downloaded some different vdf files and same result, the tunercat just gives me same error, "unable to locate any Diffinition files"....
  20. Thank you very much Hog! , i will apply to moates...

    Thank you very much Hog! , i will apply to moates for the VDF, you meantioned. And wil start from there. Thank you!
  21. Hello Hog, can you please help me choose the...

    Hello Hog, can you please help me choose the tunercat diffinition file i need to start with?
  22. Ok, Stupid me, i did not get the Definition File,...

    Ok, Stupid me, i did not get the Definition File, from moates, normaly the license for 225$ includes one vdf, i have to apply to moates for it i guess.. But i have to figure out wich vdf i need. As...
  23. Ok guys, if you can help me now, i have got to...

    Ok guys, if you can help me now, i have got to start my swap soon, and want to get ready for it! In order to do that, i would like to make a step by step instructions on what i will have to do. Now i...
  24. Hello Hog, Yes I`m positive about that, aswell...

    Hello Hog,

    Yes I`m positive about that, aswell on the official EFILive website of the RoadRunner Realtime License, you have two rows to fill in, marked with a star *, meaning that must fill in,...
  25. Thank you very much for sharing Scott, well i...

    Thank you very much for sharing Scott, well i have a friend that has the Tech2 scan tool, he bought it through Aliexpress, he uses that scan, and i used to borow it of him, before i started this...
Results 1 to 25 of 34
Page 1 of 2 1 2