I realized I actually have the early 90lb injectors, so when I set it to 80 is was too rich. I need to change out the oil/filter and then I can run it again and set up the idle and start logging some...
Type: Posts; User: mihela
I realized I actually have the early 90lb injectors, so when I set it to 80 is was too rich. I need to change out the oil/filter and then I can run it again and set up the idle and start logging some...
I broke my motor in today. The original TPS read correctly in the datalog on $OE. With the stock VE table from BHDF it ran BLMs in the 80s but it ran the whole 20 minutes without incident.
I started playing around with $0E last night, I think I will go that route. I am curious about the differences in IAC logic that you mentioned. What would I need to do to correct it? I have the...
Interesting, what makes BHDF that much different? I should look into that. $OE can be made to do fan control also can it not?
I have already adjusted the cylinder volume and injector flow parameters to my setup. There isn't much more I can do until my motor is broken in.
I have a TBI unit from a 1988 K3500 with it's stock TPS sensor. It is non adjustable with the 3 pin weatherpack style connector that sticks out at a 90 degree angle. I am using a 16197427 running $31...