Search:

Type: Posts; User: SkyCapt

Search: Search took 0.00 seconds; generated 20 minute(s) ago.

  1. Thanks Kitch

    Thanks Kitch
  2. Good afternoon: With some help in the right...

    Good afternoon:

    With some help in the right seat I came up with the following scenario:
    Minimum voltage at the 02 Sensor measured at the ECU was 0.250VDC AFR 13.4 (This took a few minutes after...
  3. Hi Dave: Thanks for taking this time, sounds like...

    Hi Dave: Thanks for taking this time, sounds like there is hope for the OBD-1 system so I'll stick to this.

    On the O2 sense voltage: the actual swings are more like 1.2VDC to 0.400VDC but with...
  4. All this comes through the OBD1 connector? I'm in...

    All this comes through the OBD1 connector? I'm in the process of specifying a laptop, I assume that the interface is through a USB? Is the software compatible with Windows 10?
    The screenshots were...
  5. The Tuner drove it around some and pulled data...

    The Tuner drove it around some and pulled data from his equipment to look at. I don't have anything. But might consider ordering equipment if the OBD1 can be made to work.
  6. The CPU Part number is a 777747. The CALPAK is...

    The CPU Part number is a 777747. The CALPAK is from a 350 CDI but from what I understand shouldn't affect anything, it runs in limp home ok. I don't have any software and wondering whether of not to...
  7. I built up a 454 to replace my 350 in a GMC Suburban

    I built up a 454 to replace my 350 in a GMC Suburban 4WD and was told that re-programming the ECM was a simple thing 5 years later I'm still having issues with the system despite sending it out to...
Results 1 to 7 of 7