Thanks myburb, I have a ostrich 2 w/G1 adapter and will get a chip burner just to help out friends with there trucks. I'll load the stock bin to the ostrich and set timing at 0 degrees later today...
Type: Posts; User: dhworkin
Thanks myburb, I have a ostrich 2 w/G1 adapter and will get a chip burner just to help out friends with there trucks. I'll load the stock bin to the ostrich and set timing at 0 degrees later today...
myburb, I bought a harris chip and found the changes by comparing with a stock bin that dave W sent me. Other than the EGR delete I found differences in max spark retard for torque management and...
Yes, that's right. I should have mentioned that I put a lunati 20080660 cam in a 5.7 L31r and the timing in the bin is set at 9.5. I installed motor, unhooked tan/blk, started and set time at 10...
Thanks for the help. I checked wires to ecm and the settings on memcal and all is good so I decided to start from beginning with the throttle body setup. I checked the timing before the procedure and...
Thanks Mac, your right. It's not the a/c, I think it's the dual fans that I installed. I disconnected the fans and used water to keep the condenser cool, turned the a/c on and didn't have any...
Installed new ac system on my 95 gmc pickup and when I come to a stop with the compressor on the engine tries to stall and I get a map code. Can I make changes in Tunerpro RT for this problem?