Thanks Dave. I plugged in my numbers and it spits out 150 for me. So I guess I'll plug that into the bin and see what change it makes for fuel demand.

Just was looking around in the bin, does 98 for a BPW sound correct? As far as I'm aware, I'm just using the stock 350 TBI injectors, so 55#? If my searching is correct that most bins with 55#...

Hey guys, I'm back after a long long long break. Finally got an itch to get back on my rig. Hoping to ask a few questions and pick your brains for tuning my motor. Spent the better part of today...

Does anything stand out as odd? I noticed when playing it back that the BLM's rise to add fuel initially then drop down to lean it out. Is it normal for the BLM's to cycle this way at times?

Just wanted to see what a custom eye sees with my park and drive idle. I think generally it looks pretty smooth and clean just need to pull some fuel out to help the BLM's. Wanted to know if...

I know it's been forever since I've gotten anything done on this. I finally got the blazer back in one piece (well mostly). I need some helpful ideas of where to start looking for my latest issues...

Bump

Ok, so a couple more questions with this optical eye, if i'm understanding the threads right, it will be yellow (or brown?) to ECM pin A10, black to ground, and pink/black trace to +12v switched?...

Bump for info on whether its needed to change the speedo gears to get it reading as close to the real speed as possible, or if running it 7-10 mph off won't really effect the ecm?

Dave, you made me remember from a while ago i had brought this up.... http://www.gearhead-efi.com/Fuel-Injection/showthread.php?690-Thinkin-im-going-to-be-need-a-VSS-Now-which-one-do-i-go-with
Now...

I have a question with regards to how the Dakota Digital VSS would be able to be hooked up to a non-computer controlled 700R4 and output a signal the ecm can use? Would i need to install a reluctor...

Just throwing out an idea here for you, I also used AFI for my TBI swap on a 350H.O. While it never ran right from their tuning, they did offer a lot of help and tuned probably 8 chips for me before...

Ok, good to know. Hopefully it really won't be used unless its in park anyway. I haven't had a chance to burn the latest to a chip to find out, and it will be a while before i post with an update to...

Mark, do you believe this wouldn't be a good way to run it, the way the bin was edited? Is the a/c raise more done by just opening the IAC more to keep the motor from stumbling more than a quicker...

Fair enough. I appreciate the help!

Nice! Thank you!! I have the a/c wire connected to a toggle switch that when flipped will idle up. The winch will still have separate power. The a/c idle raise is more for when i'm winching from...

Ok, here's the bin im currently working on. I'd like the idle to raise 200 RPM.

Is there a way that i can add an a/c idle raise to the $4F for using a winch? I'd like to flip a toggle switch and get the idle speed to raise a few hundred to help with the load put on the system? I...

Just thought i'd update with what ended up happening, removed all the previous drivers installed by the fdci site. Loaded the driver provided through the link here...

The failed test is with the cable connected to the PC but NOT connected the the vehicle. The short time it clears the test on initial plug in is very odd to me.... could this be a driver issue? I had...

Followed this setup and I have a few questions,
1st- when i setup the tunerpro side of the aldl connection, im only given the option for comm 4, is this normal? Can i only use comm 4 and therefore...

I follow those steps and i get to "updating driver" and my only options for drivers are "Communications port", im not given the 2.08.14 option as a driver :confused:

yes the power led. the receive and transmit leds flash twice then stay off. no i have not installed drivers :rolleye: and im none too computer savvy.... can i get a walk through? maybe?

ok, so i have hooked up the cable as we've discussed, and when i connect it to the laptop it pops up with the typical hardware found blah blah blah, then after about 10 seconds it says the devise is...

Recover quickly Mark! I sure appreciate all you and others have done to help out. We will be waiting for your return!! That said..... hopefully sooner than later