I will dig back through my phone and try to compile the pics. The quality isn't awesome because I was just documenting the flow paths for later, not planning on doing a writeup of the actual project....

The original ports were drilled for #10-32 threads, tapped, and had set screws epoxied in place then ground flush with the insides of the runners. The idle passage in the throttle body is unchanged,...

I certainly won't argue that. But changing the manifold to a more modern design, (or adding a 24x ignition or anything like that) would pretty much let the sleeper cat outta the bag. I did port-match...

It has been converted to a T56 manual, but the flywheel on the Centerforce dual-friction clutch is positively massive. I think it might weigh close to what the torque converter did. I modified the...

As you can see, there isn't a lot of extra room underneath, but I think I can run 1/4" tubing between the nitrous system and the plenum floor if it becomes necessary.

14905

I have several other LT1 manifolds laying around (I am fond of the system and my '55 chevy pickup has one in it as well), so I figured if it flat doesn't run I can just grab another manifold off the...

More than 1 issue involved here, so please bear with me- I have seen several people mention drilling the IAC bleed hole oversize to allow greater flow for larger displacement LT1s. It seems to me...

Thanks so much! I hope I wasn't coming across as bashing on your program. I have mad respect for your abilities and I know just enough about programming from writing CNC code to be completely...

Got all the program mods done as suggested other than the offsets. I can possibly approximate the spline using Mastercam (I run a CNC machine shop) and get the numbers I need. One other quick...

https://documents.holley.com/accel_injector_specifications_150144.pdf

This is the spec sheet for the injectors I am using

Also, you mention having BINs on your website. I'm starting to make the connection that you are the guy who wrote eehack? What website am I looking for? Thanks!

Thank you sir! I have eehack on my laptop but haven't tried interfacing with the car yet. One thing I noticed on the Accel injector specs sheet VS what I see on tunercats is that the factory chart...

Apologies in advance for the long-winded post-

Well, I may have bitten off more than I can chew. I own a '94 Buick Estate Wagon, and have limited experience with the ECM. I have done some basic...

Good evening all-

I am nearing the completion of the mechanical part of my project, and now I am trying to figure out the computer part. My current project is called the Sleeperwagon. It is a '94...