I got it figured out, I had a older version of eehack. I installed the 4.6 build and it works now.

No it doesn't pull ram when requested

Any chance of getting the part where you can add the ram/gibberish to the bin being pulled fixed? It's not adding the ram part. Thanks Jonathon

Well I found out what the 21cd table is on t-side. I asked about the table in a tuning group on Facebook and this is what was posted10395

anyone know what the o2 related tables starting at 21cd t-side does?

eehack didnt ask to save the log when i exited. another weird one, i just uninstalled eehack and reinstalled 4.4b2 just for the heck of it and it works now! i think something wonky going on with...

its working now:thumbsup:
weird thing though the debug window showed no errors just whats in the screenshot.

Thanks for fixing this for me!

10239

copied over and now i get this error

10237

its asking for these files qt5cored.dll , qt5widgetsd.dll , qt5guid.dll , qt5serialportd.dll then abruptly exits

still the same with that test also. what other ways can we go about debugging this?

by looking at that log. when i pressed ok to start acq thread... it put this in the log C:\Program Files (x86)\EEHack\accessiblebridge FAST IO DISALLOWED

10234

maybe its looking for...

well i found this app for windows,its free, process monitor 3.2
https://technet.microsoft.com/en-us/sysinternals/bb896645

i made a log to see if it can help out some, its zipped up.

1023110232

well i copied the debug eehack into the eehack directory, then started eehack, memory usage is low till i hit ok at "start acq thread" then mem usage starts to skyrocket.

102281022910230

completely uninstalled eehack and cleaned registry then rebooted. re downloaded and installed beta 4 from your site 10:20pm est usa. still wanting to freeze on startup but i can click on the modules...

copied eehack.exe over the existing and still freezing when starting, maybe a memory leak? when watching eehack load, in the task manager memory usage goes above 1000mb. also does the same with the...

newest eehack beta freezes when opening for me, also runs up memory. uninstalled old eehack(single thread) then cleaned the registry then install the newest beta.

10217

is there any scalars related to the fuel pump as in prime time?

heres a few you dont have yet. checked them with tunercats checksum app and all the checksums match whats in the xdf i have.

http://www.reddevilriver.com/aldl.html


EDIT: this is the same thing as the red devil so you know what it is...

well the port setting was changed it was at 912600 so i put it back to 9600. with just the t and e side checked it flashed fine. then when i checked the lower latency it gave me this.101401014110142

10139 then this is with the t and e side checked plus the lower write latency checked. when i first tried with the lower latency checked it did this error twice on the t side plus had the error from...

10138 this is with just t and e side checked nothing else is checked.

using eehack4.2BETA2 had some errors when flashing. pcm is ok.

I have this working now. I patched byte 36 in the datastream as it was not used

Yes the pcm survived and works as intended. I figured when I hooked up scan9495 that there would be error 50 prom checksum but no.