Search:

Type: Posts; User: 1BadAction

Page 1 of 4 1 2 3 4

Search: Search took 0.02 seconds.

  1. The DRAC on a 91 suburban is around the area that...

    The DRAC on a 91 suburban is around the area that the column bolts to the dash. You need to run a VSS wire from it to the 7427 to get a speed readout to the PCM. No idea why, but this was how I had...
  2. I ended up keeping the stock injector tree for...

    I ended up keeping the stock injector tree for now, with a 28-32lb spring and an Aeromotive Stealth 340LPH pump. They're running at a hair over 28psi so I have the injector size setting at 90 LB/HR....
  3. Replies
    6
    Views
    2,874

    Too much idle timing and too lean at an idle will...

    Too much idle timing and too lean at an idle will have these things surging every time.

    That trough in the VE also points to something mechanical being off. I'd verify cam timing and check...
  4. However, looking at your knock counts, it wasn't...

    However, looking at your knock counts, it wasn't out of hand at all, so it's not REAL KR, it's just a display or logging error. :happy:
  5. Are you sure the below parameter was saved to the...

    Are you sure the below parameter was saved to the tune when you were datalogging? It looks like what happens when this is not done, but you may need to change the ADX to match, I'm not sure on that...
  6. I looked through pretty much all of his posts,...

    I looked through pretty much all of his posts, seems like after getting the data right he did ok, but ended up smoking the motor anyways. Not sure why.

    EDIT: JUST found a thread I missed from him,...
  7. "good option, not better or best" is pretty much...

    "good option, not better or best" is pretty much the theme of the whole truck. LOL.

    I'll give it a shot and see where I land, and I'll post the XDF and ADX for everyone else when they're done and...
  8. I'd love an EBL but I'm not going to buy another...

    I'd love an EBL but I'm not going to buy another ECM just to go through the headache of piggy backing the factory one to get trans control.

    I forgot to mention... I'm going to run an external...
  9. Also, I'm running an E-trans, so no getting away...

    Also, I'm running an E-trans, so no getting away from the 7427.
  10. $OD With 2 Bar MAP/Turbo - questions and observations

    So I'm back in the obd1 world on a new rig, and decided to slop together a single small turbo kit with iron manifolds and TBI. I know there are some issues, but there are also some benefits. 7-10 PSI...
  11. Replies
    2
    Views
    1,526

    Adding knock sensors (sanity check)

    I'm swapping from my 7427 to a terminator x setup at the same time I'm installing a new BMP Merlin IV based 582ci big block in my suburban. The Termi X has the capability of running newer 2 wire...
  12. Replies
    0
    Views
    16,666

    454-502 MagMPI Marine intake

    Complete intake with modded fuel rail, Aeromotive adjustable regulator, cleaned and flow matched Keihin 48lb/hr (OEM Mercury) injectors, Russell braided nylon -6an supply and return hoses/fittings,...
  13. Replies
    2
    Views
    3,521

    Yes. Tunerpro and...

    Yes. Tunerpro and http://www.moates.net/burn2-chip-programmer-p-197.html?cPath=64 with a http://www.moates.net/g1-memory-adapter-tpi-etc-p-32.html?cPath=64 and a ZIF socket.

    info on your PCM is...
  14. Replies
    24
    Views
    44,534

    I actually have a bone stock factory bbc throttle...

    I actually have a bone stock factory bbc throttle body fresh off my truck if you're interested.
  15. Replies
    24
    Views
    44,534

    FITech is getting a horrible rep in the community...

    FITech is getting a horrible rep in the community at large. There was one guy talking about how great it ran and how easy to tune it was on a facebook page about a year ago, then the truth came...
  16. Replies
    0
    Views
    4,132

    Injector offset vs battery voltage

    I think I have it. found some more posts on the subject and http://www.fullsizechevy.com/forum/showthread.php?324050-Injector-BPW-Offset-vs-Battery-Volts/page2 is a good one.
  17. Replies
    25
    Views
    31,207

    Hmm. At least it seems like the standard editor...

    Hmm. At least it seems like the standard editor allows you to

    Space it out like this. Icons seem to have shit the bed still though. :(
  18. Replies
    25
    Views
    31,207

    is it good?

    is
    it
    good?
  19. Replies
    9
    Views
    6,905

    Would that maybe be a real deal bug? Programming...

    Would that maybe be a real deal bug? Programming induced? Interesting for sure.

    Doesn't do that with $OE, for anyone wondering.
  20. Replies
    17
    Views
    25,977

    Same as the hp500 Merc racing intake. I think the...

    Same as the hp500 Merc racing intake. I think the next bbc truck I build is going to be a 2dr Tahoe setup with 4l80e/AWD and an AFR headed 540 sprayed Merc racing blue. :eek:
  21. Replies
    25
    Views
    31,207

    wysiwyg editor missing!

    And no it's not in my CP settings... There's no formatting controls, smiles don't place when you click them, I need to manually place the < P > to get another paragraph, etc. happens on all...
  22. Replies
    17
    Views
    25,977

    The AEM regulator would be awesome but I have no...

    The AEM regulator would be awesome but I have no clue if it would fit on the merc rail since they don't have the same space constraints in an automotive application. The honda regulators aren't...
  23. Replies
    5
    Views
    4,660

    I just seen you're in the UK... In that case you...

    I just seen you're in the UK... In that case you should look at replacement 7060s and see how common they are. Might want to stick with the 7747 because the 7060 is not nearly as popular, not sure...
  24. Replies
    5
    Views
    4,660

    Better xdf definition file with the 7747 but it's...

    Better xdf definition file with the 7747 but it's slower, and the 7060 is more than capable of doing what you want. After being told how great the 27 is and finally swapping my stock 7060 out, I'd...
  25. Replies
    17
    Views
    25,977

    21 in this pic is what I'm missing... If I had a...

    21 in this pic is what I'm missing... If I had a lathe I could cut a hole in the one I have but I don't trust myself to do something that small freehand.
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4