I understand a little of what you said but I would not know where to look to get that done. I wonder if anyone has done this before.
Type: Posts; User: muddyjimmy
I understand a little of what you said but I would not know where to look to get that done. I wonder if anyone has done this before.
I have been datalogging my car at the track and have noticed that the highest RPM it logs is 6375. My car definitely has a higher rpm than that when running down the track. Is there a limit in...
I programed the settings in the Wideband and inserted conversion for 10-20 afr. Everything seems to be reading correctly and the laptop matches the gauge. Thanks again for everyone's help.
So I did the BLM locker and added 20% fuel to my WOT table and I made a couple runs on my way home tonight. They were all rolling WOT runs and the AFR stayed 12.7-12.8 all the way. I started with...
Thanks for the information on that. I am going to lock the BLM and add the 20% and tune from there with my wideband. My car is just a bolt-on LT1 so I would think that the fueling should be close...
I am going to try this on my tune but I did notice in my PE% Change To Fuel/Air Ratio @ WOT table the numbers go negative at 4000 RPM. Is this normal? If I multiply by 1.2 to get the 20% wont that...
Awesome information guys. This is what I am looking for. I will try it out in the next few days and let you know how it goes. Thanks again.
Ok thanks for the information. The Innovate MTX-L has the 0-5 volt output that I was going to use at 7.3 - 22.x AFR range
That is the conversion equation I need to make the wideband read correctly in TunerPro? If I remember correctly, when poking around in the "edit ADX" file, I did see an area to insert a new...
That should not be a problem since the a/c is no longer on the vehicle. How would I set it up so it will datalog AFR instead of psi? Is there a conversion in tunerpro that I can make?
The A/C wire is one that I left during my conversion but it would not be a problem to add the Oil Temp if that would be a better option. I do not know how to add the output or change the...
Hello all. I am in the process of tuning my 94 F-body LT1/4L60e that has been transplanted into an 85 Camaro. It seems to run great on the mail-order tune but I just have a feeling that I can get...