I have run this log, and is way more responsive. I am much happier now. Snap throttle is responsive now, and my BLM's look good. I have Enrichment through fuel and adjusted my shift firmness by...

cc502: (218/224 .528/.537 112lsa) w/ 1.5RR's
Features Comp's relatively newer technology XE (Xtreme Energy) lobes for more top-end power. Exhibits great drivability with a strong mid-range and...

I am confused, are you saying that you are more comfortable with the MAF making corrections in closed loop. Versus PE mode and MAF disabled?

OK, sorry I have been editing my post I mean to correct my tables in SD from the closed loop. If you could look at my BIN and help from here in the SD route. I am open to suggestions.

V/R

You have just got my attention with this. I would prefer a speed density tune in open loop/closed. If you have had successful tunes on LT1 with similar cam, I would like to see how this effects my...

I have done the same but used 128 for default blm. On another subject I am not sure if under normal driving my TCC should lock
up. It is set for 2200, but I thought it should only lock up under...

My runs are making the files slightly larger than allowed. I am also unable to upload my bin files. The car is running better now though. Somewhere during full warm up and 10 minutes into the run...

I have everything buttoned up pretty tight vacume wist intake through throttle body. I have run the VE calibrations made from vemaster into my PCM and have it looking a little closer to balanced...

Thanks, that makes sense. I will try the reset BLM learn tip out. How do i make the car more responsive off the line. If I give more than 25 percent travel from a stop it bogs small audible pops...

I have ziped both bin files and uni files, for reference. The only changes Commanded that will be different in the bin file is idle settings. I figured out how to change that last night. The uni...

I am unable to upload the .uni file but can email if requested. New to forum and 1st day tuning and logging. Thanks

using datamaster to log my tune i found something wrong.

Lterm BLM's are comming in at 120, but the Sterm are balanced out at 128. I don't have exhaust leaks.

Please look at my datalog and...