Search:

Type: Posts; User: 1320_john

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    12,588

    Set switches to 1 and 3 up, 2 and 4 down. That...

    Set switches to 1 and 3 up, 2 and 4 down. That should get you there.
  2. Replies
    6
    Views
    12,588

    0-5v output to pon 1 of the rj 45 connector and...

    0-5v output to pon 1 of the rj 45 connector and you should be good to go.
  3. 13599 I played with my setup a little tonight....

    13599

    I played with my setup a little tonight. Win10 certainly does not like to easily cooperate with Bluetooth SPP devices. They have changed some things around. Win10 still associates two COM...
  4. In your adx file, change the baud rate from 4800...

    In your adx file, change the baud rate from 4800 to 9600. The BT adapters convert between 4800 or 8192 baud to 9600 baud. Let us know if that helps or not.
  5. Replies
    13
    Views
    21,286

    I believe ALDLDroid may be used with the Moates...

    I believe ALDLDroid may be used with the Moates Ostrich on PROM based ECMs. For 1994/1995 LT1's you will want to use EEHack. SteveO on this board is the author of EEHack and a LT1 guru.
  6. Replies
    167
    Views
    138,649

    You are on the right track. A217 adx file will...

    You are on the right track.

    A217 adx file will give you all the engine data for your van if connected to a 4L60E transmission.
    A218 adx file gives you all the 4L60E transmission data. There are...
  7. Replies
    4
    Views
    4,342

    Send me the csv files. I prefer to look at it...

    Send me the csv files. I prefer to look at it using a spreadsheet.
  8. Thread: ALDLdroid

    by 1320_john
    Replies
    1,128
    Views
    911,459

    @Jim_Rockford: adx file for your B4C should be in...

    @Jim_Rockford: adx file for your B4C should be in your gmail account; A100; I also PM'ed you a link for it.
  9. Thread: ALDLdroid

    by 1320_john
    Replies
    1,128
    Views
    911,459

    @Jim_Rockford: Are you scanning or tuning? If...

    @Jim_Rockford: Are you scanning or tuning? If you are tuning, you need the xdf file. If you are scanning/datalogging, you will want an adx file. Because you state Bluetooth adapter, I'm assuming...
  10. Thread: MEFI4 adx

    by 1320_john
    Replies
    0
    Views
    2,437

    MEFI4 adx

    Hi everyone.
    Would anyone maybe have the adx file for an MEFI 4? Trying to locate it. Thanks in advance!
  11. Thread: ALDLdroid

    by 1320_john
    Replies
    1,128
    Views
    911,459

    @GaryDoug: I looked at the file. If you go into...

    @GaryDoug: I looked at the file. If you go into TunerPro RT edit mode, each value and bitmask is not assigned to a "command". I have had a similar problem and assigned each value and bitmask a...
  12. Trying to reverse engineer something like this...

    Trying to reverse engineer something like this takes great effort. Before you proceed down that path, consider easier options like Megasquirt. Keep an open mind and good luck!
  13. I'm sure if you duplicate the subject chip and...

    I'm sure if you duplicate the subject chip and used the funny box, everything would work just fine. If you knew what was going on in the funny box, you could get a bit further along. You can do it...
  14. I parsed the second bin you posted then looked...

    I parsed the second bin you posted then looked for similarities to the 8K bin. The second bin has 16K of data and 16K of fill. The upper and lower 8K differ significantly. Best I can figure,...
  15. I thought that would have worked. The file you...

    I thought that would have worked. The file you posted is 32KB long. The first 16KB was just fill data. The 2nd 16KB had data. It had the same image 2 times, as you would expect. I used the diff...
  16. Try these...

    Try these...
  17. Post the bin up here and I'll try to parse it.

    Post the bin up here and I'll try to parse it.
  18. Most of the pins align from chip to chip; they...

    Most of the pins align from chip to chip; they use the same address and data pins in the same locations up to A12. On pins 1, 26 and 27; they added additional address pins to access the extra...
  19. Looking around the web, it doesn't appear that...

    Looking around the web, it doesn't appear that the Burn2 supports the 2764 chip. I think the bin file should be around 8K.
  20. I don't have a burn2. I have a different...

    I don't have a burn2. I have a different programmer. The Burn2 will probably read the 2764, but it is toggling those pins I mentioned, that aren't address lines. How big is the bin file? What...
  21. Pins 1, 26 and 27 are different between the...

    Pins 1, 26 and 27 are different between the chips. Those pins are for A13, A14, A15 as the size increases. 2764, 27c256, 27SF512 Inside the ECM they are probably grounded. 2764 should be readable.
  22. Those are 2764 chips. Does the Moates Burn2 have...

    Those are 2764 chips. Does the Moates Burn2 have an option for 2764 chips? I'm going to look for the data sheet.
  23. Throw up some pics of the decoder and chips if...

    Throw up some pics of the decoder and chips if you can. Part numbers on everything can help. Does the good stock chip have a part number on it? Manufacturer? Are you sure the 27SF512 is...
  24. Let us know the brand ECU and stuff; folks here...

    Let us know the brand ECU and stuff; folks here can take a look. Any idea what microprocessor the system is using? Anything is possible. The ECU manufacturer could store a key on the EPROM in a...
  25. Are you sure they aren't protected against...

    Are you sure they aren't protected against writing? The Atmel EEPROMs that I use have that capability. You can send some commands to them and they are locked against writing. The microprocessor in...
Results 1 to 25 of 54
Page 1 of 3 1 2 3