Just wondering if you can steer me in the right direction from hesitation issues while accelerating ecspecially when cold at slight throttle.
Stock 350 no egr.(Block off plate.) brian h. 20hp chip...
Type: Posts; User: gearhead1
Just wondering if you can steer me in the right direction from hesitation issues while accelerating ecspecially when cold at slight throttle.
Stock 350 no egr.(Block off plate.) brian h. 20hp chip...
A sad day for all of us,
Even if some of us did not know him personally just online I dont think there is 1 person out there interested in fuel injection that has not read and or learned something...
Yeah I am going to push the pin out of my female connector just thought there was a simple switch inside the bluetooth.
So much for service after the sale! I hope no one else has any other problems ...
Anybody know how to switch off the 10k resister on reddevilriver aldl bluetooth?
When I use it , it goes in aldl mode and raises my idle.
Tried calling,leaving messages but with no reply from Timm...
It could be a plugged or partially plugged cat.
Same goes for me except i am not a farm boy or that old... lol!
All the best also; hope everything goes well EagleMark!
I would check the pick-up coil as no signal = no pulse width.
EagleMark- I was referring to your opinion on this issue with this company, and I think it will have an effect, because of who you are.
So many people trust your opinions and knowledge about EFI...
EagleMark- IMO...
For all the help you have given to all the forums and probally thousands of people over the years;maybe even more!
You would think they would bend over backwards to make things...
I have the same intake just drilled 9/16" and tapped 3/8"NPT that divit hole on right side of thermostat wet shopvac out any shavings install CTS...then bobs your uncle!:thumbsup:
Works perfect!
...
Six_Shooter- You talked me into it...Just ordered the burn2:nono:
You guys have any tips for this burner?
Thanks again for all the help.
Thank you guys for the replies -I saw my OL mode was longer then normal but I did turn around and drove straight into the north wind and it was about -10(22)that day and thought maybe the cold was...
Here is a couple before and after with a little longer idle periods I wanted to see the differences from just doing as EagleMark suggested and turning the throttle screw in half turn and see what...
EagleMark- I cannot burn chips as of now as I am on the fence as to which to invest in ; a burn2,ostrich2.0 or a AutoProm ? I am currently running 3 vehicles with OBD1 and it seems like a no brainer...
Eaglemark- Should I turn the throttle blade screw in as it sits or ...
jump A-B unplug IAC when bottomed ,start,adjust screw,shut off, then adjust TPS to original setting like I was adjusting...
I deleted and put in different thread already but you were too quick sorry 'bout that.
here it is -
Eaglemark -just new at this can you tell me what you think of these short jaunts made in my truck...
See Below...