Hello all,
I have been away from the forum for a while since I was involved with other issues.
Now that I am back on my project ' converting my GM 350 from carburetor to TBI' I am in a conundrum...

@ Six_Shooter: I hear you and will seriously take your advice.
I am picking up all of my needed parts today, so sometime next week I will start the project.
I also need some advice as to which...

@ Uncabob: Thanks for the link to the schematics.
@ Six_Shooter: I am looking at installing the ECM in a Air Filter Box from the Cadillac Northstar Engine. This will allow the cool outside air to...

I do not remember if I mentioned this in my previous posts so here goes............
I installed a GM 350 w/700R4 trans in my Jaguar XJ6.
Right now it is running with a Quadrajet carburetor and I...

Thank you so much for your help. I was able to go in and change my password.
Now I can look at the 127747 pin out.

Hello all,

I have been away for a while and can't seem to find my previous posts.
Maybe someone can tell me how to find them.
I am looking for an electrical pinout for ECM 1227747.
Any help...

I pretty much have the donor harness sorted out. Thanks for the info regarding the ESC. My main concern is the ALDL connector. My has eight wires and I am trying to figure which ones I need to...

So, I am in the process of weaning the electrical harness of the circuits I would not need, but I need some help. I have identified and checked the circuitry from the ECM connectors to the following...

Thank you. I can find a 305 TBI unit and intake manifold. If that fails can I purchase 305 injectors and install them on the 350 TB?

I am in the process of collecting all the necessary parts I would need to Convert my Chevy 305 motor to TBI. So far I have the following items from a donor vehicle which I picked from the salvage...

Hello All,
My name is Frank and I joined your forum yesterday. For a while now I have been looking for information on how to convert a Chevy 305 engine to TBI, and found your site to be most...