Anyone?

This is after I smoothed then added the addr then smoothed again any suggestions im just trying to get a starting point being I havnt got the new ecm yet or the cables hardware I need

7953795379537953

Sorry im having problems with the pic

*20141012_121850.jpg*(95.9 KB)*Attachment*

*20141012_121850.jpg*(95.9 KB)*

Attachment*

How does this look

*20141012_121850.jpg*(95.9 KB)*

Attachment*

Does this look ok?

But how

It says to add the information from 've2 into ve1 then zero it out hoe do I add that information and do I add it to ve1 original or ve1 corrected

Theres should be someone that can tell me how to add thi to ve1 and witch on to add it to??

http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=7924&stc=1&d=1412873421 how do I combined the addr abd witch one do I add it too
someone knows ?

Ok went through the links read alot probably gonna have to do it a few times its still a lil much

Ok but how exactly do u do that and put address into corrected ve1

What's up with the 've" table? One old one new then one days add these values to 've1 but theres 2 and it did make sense on how to add the info

So as for the egr how do I eliminate it and the knock and vss someone told me to ground the park switch what the manual option do?

Thank u guys at first I just want to get it running for know to see how it runs so cutting out egr or knock someone told me about the p/n switch on the 7747 to not use the vss I've been working on...

Ok thank you

Thank you for your help im gonna download and see what I can figure out

Ok thank you

Ok so xdf and $42, the xdf the bin file? Im a lil confused about the ads xdf etc

When I started I didn't know about different ecm or pcm I have a 7727 and I was told it would be better to use a 7747 because I dont want vss or knock or egr I have 87'-88' tbi 350 with mils cam...

Seems to me my learning curve with this is gonna take awhile

What about the p/n switch?and what is the situation with these :ads?, Adx? , xdf?, xdl?
And which ones do i need
l

Ok im gonna work on the ecm and harness is there a how to on the park switch and then what mask and bin? I do appreciate all your help

But if u say it would be easier to get the 7747 I found one at local junk yard good price but should I get a harness of the same vehicle or will the one I have work I dont seem to understand why ! 88...