Didn't see this one on here.

PCM hammer beta does not work for my car. I was able to get my account set up on PCMhacking so I posted there. Hopefully this can be sorted shortly. Stock driveability is lacking.

Ok, so I put in a new PCM with the same part number, but I'm having the same issue with PCM hammer. It doesn't recognize it at all. YFXS is the code on this new PCM. I can't get the logger to see...

wow, that is some shocking timing for that to be released!!
thanks for everything you’ve done man.
time to order a back up PCM for sure.

I got it! Thanks!

Now... how do I upload and since this has been experimental and temperamental should I worry about an issue happening and bricking the PCM?

I'll try again with the timestamp back on. Not sure why I turned it off, but I did uncheck it. I cannot find the files saved from those logs. I don't know if they saved at all.

I definitely...

This also looks like after the app gets spooked, the communication continues and it dumps the remaining blocks after.

When this is happening the guages reset and it stops and wants to save, but...

This one got further, but still failed. I accidently saved it in a weird place again. Searching on windows 8 is impossible for me so I have no idea where the files are, but I don't think it matters

This second attempt was an obvious fail. Didn't make the file at all.

Here's the VPW console stuff from that.

I'm going to make a second attempt right now.

looking at the log, to my amateur eyes it looks like it send another request but received nothing back after 07 F0 00 <-- is that the address of the next data block requested? I've done some in...

Ah, I wondered if it was a trial read of a smaller set of blocks or if I missed some. File attached. I will attempt another read as soon as I can.

Definitely possible that the cable was...

saw 5 seconds silence

looks like its dumping code in blocks with the script

I saved that as bin file. Is that my entire PCM content? That's incredible man.
it's only 192kb. Tiny tuner can't...

6C FE F0 20 looks like it resets the dash and probably restarts the PCM?
[13:28:22.516] 6C FE F0 20
[13:28:22.534] 6C F0 10 60
[13:28:22.575] 6C F0 40 60
[13:28:22.613] 6C F0 58 60...

[09:58:24:767] PCM Hammer 021
[09:58:24:767] Tuesday, October 03 2023 @09:58:24:76
[09:58:24:767] Initializing J2534 Device
[09:58:24:767] DLL already loaded, unloading before proceeding...

It connected at a basic level


Connecting (VPW)...
Connection failed. Check settings
Connecting (VPW)...
Connection failed. Check settings
Connecting (VPW)...
Protocol2 have connection from...

I looked around pcm hacking but didn’t see any beta work. Only release 021 which I have already.

im not that familiar with the site and I’m on my phone so I could have easily missed it if it’s...

2g1wz121049342922

How do I get the beta? I have the last release but I saw some new work done for it.

I don’t even know where the pcm is. I haven’t looked for it but I know it’s not in the air box like my gtp.

Can anybody help me figure out if I'm missing hardware or having a more fun problem.

I have an OBDXpro VT that easily connects to my 04 tahoe. I thought it could also read my Monte PCM, but PCM...

exactly what I'm after thanks. my plan is to pull the base file and obviously save it. If there's not an XDF available for it directly, I'd probably look into disassembling it and/or comparing with...

Nope. There’s not a list of them somewhere?

I'm trying to find any information on tunerpro with this. I know nothing of this generation of PCMs. Can somebody tell me what Bin/XDF I should be on the hunt for to start tuning this?

Thanks

Which xdf/bin file should I use for an 04 tahoe 5.3? flex fuel I believe.

New here. I used to own a few firebirds, my brother has a 94 TA. I'm investigating his rom in IDA and found this thread.

Has anybody made any logical hacks for these? Is there any empty space in...