In stock - ready to ship https://boostednw.com/bnw-socket-booster

huh..? :rolleye:

You just Connect the emulator then open TunerPro RT, Load your bin and xdf, and then click "Initialize emulation hardware" then you can click "Upload current bin to emulator"

If you want to then...

Saw this thread and wanted to let any future reader, we have these Cobra MotronicRT R6 now in stock. We source parts, assemble and stock right here in USA https://boostednw.com/motronicrt

I can easily, even if its just for a small batch.

Just need more details on how everything should be arranged. So you mentioned the IDC being a straight, and not right angle, and then connecting...

if all else fails, you can just add this on to boost it

https://boostednw.com/bnw-socket-booster

I plan on finishing the chip extender board, and adding these components to that as well so the...

Yes the header can be changed to whatever type that pokes out straight, right angle, it can be moved, etc

the board's aren't made yet, its just an altered design we have from our Socket Booster...

sure

This was just a quick example, could use whatever header in whatever orientation is most desired. And yes we do our 3d design/printing in house.

This is an initial example, but without signal amplification going on, noise will be an issue. Even the Ostrich cable on some ECM's is too far of a stretch and causes issues. We will be creating a...

Then throw it in a nice little 3d printed enclosure, and you can have yourself a remote chip


https://i.imgur.com/3yMMnpV.png

Also we have tons of Genuine SST 27SF512 in stock

As well as replacement genuine SST adapted from PLCC chip footprint to DIP 28 to be usable as a regular 28 pin chip

or like this..



https://i.imgur.com/yYiOzko.png

https://i.imgur.com/svNuVbd.png

obviously then replacing that chip socket with a zif, i just didnt have zif socket 3d model to put in there

We can make one, So you mean the same thing as the moates chip extender?
...

The software (tuner pro RT, etc) is what does the recording, hence needing the cable connected to pc and datalogging/recording while driving

Now a bluetooth one is a possibility now days, but that...

Glad we got you sorted! Sorry it took a bit of work to get there just how it is sometimes when you don't have physical access. Which brings up a good point for others, sometimes its easier to get...

We will have a replacement in about a week, just FYI if you're still looking

Howdy! :rockon:

thanks!

Will do for sure once we get a chance, only issue is we have no ford stuff to test with, no ecms, and no experience with quarterhorse units or one to test and do R&D with. If someone wanted to assist...

Thanks for the appreciation! We are glad and trying to do what we can. We had a new burner and adapters out in about a month after the news! Yes it was unfortunate it was so abrupt, we also purchased...

Eventually if there is still a need (i.e. someone hasn't already came up with another solution) by the time we are done with other things we have in development

Yes it will, we worked to get our burner integrated into TunerPRO RT and will do the same with the emulator!

Working on this as well





Sure thing, we're open to re creating whatever is still in need so we are open to suggestions!

Soon! trying our best to get everything ASAP and get to market like we did with the Burner and ALDL, etc

and Yes you should be able to use an ostrich2/equivalent emulator with that ECM after doing...