ok. yes duh. after 5 data logs and 5 diff chip burns i got it as smooth as i can. take a look and see what you think. its a 255 ci dodge with 350 tbi and a v6 computer.
13281
...
Type: Posts; User: 1967Killer
ok. yes duh. after 5 data logs and 5 diff chip burns i got it as smooth as i can. take a look and see what you think. its a 255 ci dodge with 350 tbi and a v6 computer.
13281
...
What is KOEO?
I was meaning since I didn't put the oil pressure sender in I don't get the pump coming on , I have to jump a hot wire to the relay.
I data logged the 2.8 bin and a lot of the numbers was below 128. 90 was the lowest and the highest was 132. I figured it was still a little rich.
First off on a1228062 or 1227747 ECM what does the green/white wire in A1 do? DOES it turn the relay on at all or have I done something to my bin to mess it up? I didn't put a oil pressure switch in...
I'm going to try and get it running this week sometime. Hope everything works out.
i read one out of a 1992 chevy van. I was told it was a 350 with 700R. I pulled the stuff off the motor and got the ecm.
i have a stock 225 that im going to put a tbi on. i found a 2 barrel intake for it and going to put it on. i have a tbi adapter and a E2000 fuel pump with a 10 gallon fuel cell. Got a 350 TBI and a...
Chip wasn't seated good. Fixed it.
got a code 51? What could that be?
will this work
Edit Log for 4.3KD.bin created by TunerPro.
**************************************************************************
08/06/2018 18:02:39 Scalar: Minimum Coolant Temp for EGR...
thanks
This will be set up as a stand alone in a Chevy luv. It's a stock 4.3. Thanks
I have a 4.3 ECM number 1228062 and I want to turn off VSS and EGR and the knock sensor. I have flash chip and a chip programmer and tunnerpro downloaded. I will read the stock chip and save it. Then...