let ma also add that everything the guys on this site have helped with worked out great sorry I don't get on here more but im now working 100 plus a week and don't get to do much on the side but...
Type: Posts; User: droptopstng
let ma also add that everything the guys on this site have helped with worked out great sorry I don't get on here more but im now working 100 plus a week and don't get to do much on the side but...
I have just tried to upload but would let me.... look up a fellow on here goes by jeepsandguns I believe but he gave me all the right pieces to complete this puzzle truck now runs great and...
thanks by the way
not sure what could be the problem but as for theeprom error im using and ostrich 2.0 should i be setting checksum to AA and as for the data do you have any ideas what could be causing it because i...
guys thank you so much for all the help I have been fighting trying to get the adx to work but finally figured that out and actually got a log tonight for a few mins anyways and wanted to see if...
Well I
don't think. I have ever seen a groove on a 60 or 60e but all 2wd outputshafts have 2 holes in them for the gear or ring
guys thanks so much yall are more help than you know........if I can ever help any of you out with anything please let me know
thanks jeeps i actually understand what im doing now lol seriously nice to see smart people helping dumb people
hahaha funny you say that ...it had a street and perf setup on it and when i gave them the cam specs they went uh that will never work lmao.... its a fast burn 383 crate motor with a ported huge...
, 222°/230° @ .050", .509"/.528" lift, 112° center lobe and its in a 63 chevy truck with a 700r4 and a 9 inch rear on 20" tires with 355 gears and should wieght around 4800 with everything on it
and yes pretty big cam and one other thing I just thought about I have the throttle blades opened a little too far at the minute but not sure that is causing any problems other than a 900 rpm idle
absolutely pure luck lol this is why I love this board.....honestly I dont know why it works but it works decent that is what I was saying originally is I didnt understand why it works but it does...
I did check with the est wire disconected but one thing that is not certain is if the timing marks are right,I am gonna carry a degree wheel with me tonight and check the marks to see if they are...
thats where this started at and thats the point I have gotten too ....I was told this would never work I made it work maybe not right but I would like to get it a close to perfect as i can...I just...
I dont think any of it looks good Im just happy it is mobile but would like to get it right .I cant figure the whole history parts out so I am blind at best but it seems to actually run decent.. I...
I am also having an issue my adx will not show me history tables and im ignorant as to how to add that feature
kinda thought I had too much in there but it doesnt seem like it driving it and the plugs actually look decent but thats what I thought just dont know why its taking so much timing to get it to run...
yes that reluctor comes off easy with a gear puller or a brass drift just pay attention which hole that the retaing clip is in on your old trans as there are 2 holes in the output shaft
great topic been wondering this myself
THANKKKKKK YOUUUUUU everyone who has help me understand what little I have come to learn about this system.... I have finally got everything together and made a startup tune just by uneducated...
been sick and working alot and sick some more so havent been able to work with this truck project of mine in a while, however Mark has helped me with pieces of it in the past but we have kinda...
well if you would like come on but im telling you im no tuner just a tinkerer lol but come on anytime you like
Just happy I could return some of the help to this forum I have recieved
no it shouldnt thats what will happen in 700's though they like to knock the filter out from time to time ...always replace little orange seal lol
I believe all the 4l80s are close enough to work except for the later model that had a single connector prndl switch as i know it had a different epc solenoid but I will verify this monday morning