Are you able to see from the xdf how or if the MAP sensor is used? I can see it goes to the dash and then the pcm outputs a duty cycle to the boost solenoid but does it have any effect on fueling?
Type: Posts; User: dan_t
Are you able to see from the xdf how or if the MAP sensor is used? I can see it goes to the dash and then the pcm outputs a duty cycle to the boost solenoid but does it have any effect on fueling?
So I just tried a MAF from the same car I pulled the Prom from (93 supercharged) and it barely runs.
I have some gas and a box of matches, anyone got marshmallows?
I will try that. It actually ran well with this maf and the NA prom.
Switching to V5 made everything display correctly. VATs is no longer an issue. Strangely its running very lean with this prom. BLMs of 150+ I'm wondering if the MAF I picked up from a Supercharged...
That test.bin still shows a value of 5.0 but it RUNS!!!!
Are you using TP V5 or V4? I'm using V4.
Error - one or more checksums could not be updated. Check for checksum addressing, etc, validity
I did start with the fresh bin. The same one I sent you. Would you be able to maybe edit the bin I...
VATS enabled was set at 5.0 - I reset to 0.0 and still have the same issue. Also get a checksum error
Umm how can I do that? And WOW you really you really know your stuff
With both disabled it runs for 1sec and shuts down.
I have paid for the def from Tunercat but only after paying noticed on their site that they are closed for July 4th holidays.
BCFN is attached. This was read directly from the Memcal.
Is there anyway I can check where the VATS flag should address too? Really all I need to do is turn VATS off. I would guess that the...
BCFN is NOT in $5B4 as listed on here - the TCC vs Spark and MAT tables are all messed up.
Would it be at all possible that I'd have to disable the VATS flag in the BCFN using $5B4 AND $5B5 xdf? They have their VATS enable in a different location on the bin. Could the PCM be checking both...
AXAZ the L27 Prom looks to be in $5B5
BCFN looks to be in $5B4
I unchecked VATS on the L67 bin and it STILL failed on VATS . How can I be certain what def to use for the L27 and the L67?
Any idea's people?
Yes exactly. Doesn't make sense to me
Hi all, working with a 1992 Pontiac Bonne - was originally an L27 NA car, has been converted to the L67 Supercharged engine.
L27 uses a 16141470 PCM with $5B4
L67 uses a 16141470 PCM with $5B4
...
Hi all,
I'm hoping that someone may be able to help in locating a file that was uploaded to the LS1LT1 some time ago. The thread in question is:...