Search:

Type: Posts; User: impala68

Search: Search took 0.01 seconds.

  1. so my whole problem turned out to be a bad...

    so my whole problem turned out to be a bad injector

    she was only running on 3 cylinders

    i pulled the plugs to do a compression test and saw one plug was clean and looked brand new ......
  2. decided to pull the plugs to do a compression...

    decided to pull the plugs to do a compression test which was perfect ... but then i noticed one of the plugs looked brand new, so i checked spark and that was good ... checked duty cycle at the...
  3. does this ecm have a limp mode 16196285 - bin BMZX $36.xdf a269.adx

    help

    brand new engine with some performance mods and its a pig ... cant get out of its own way ... granted its a 4 cyl but its 100 times worse then the other car we have with the same setup
    ...
  4. well i don't have much of an update as we had...

    well i don't have much of an update as we had beautiful weather this weekend so i spent most of it painting the 2 racecars ... have one more color to shoot tomorrow morning then i'll be back on...
  5. So I'm thinking I may try and grab some referbed...

    So I'm thinking I may try and grab some referbed tbi Injectors and give that a shot when we get a break in the season

    but on that note I would need to raise rail pressure and still look stock ......
  6. got ya ... so i needed the conversion to voltage...

    got ya ... so i needed the conversion to voltage then i can multiply by 20
    i figured 0v was 0kPa and 5v would be 100kPa which is how i came up with the 20 as a multiplier

    i will test this first...
  7. one of the issues here is i wont be driving the...

    one of the issues here is i wont be driving the car and getting accurate data from the "driver" isnt an option lol
    so other than the what i can hear over basically open exhaust with an untrained ear...
  8. steveo the modded adx is attached yea i'm...

    steveo the modded adx is attached

    yea i'm worried about adding too much spark as ill only be able to see knock in park ...

    i'm also used to being able to see more info with the logging from...
  9. Thread: Hello

    by impala68
    Replies
    4
    Views
    3,300

    yes the stock injectors are a huge issue ... but...

    yes the stock injectors are a huge issue ... but i have a 98 block already bored .020 over and head that needs work that i'm building for next year/backup ... that block has the newer plastic intake...
  10. no map value only map voltage when trying to make a history table

    i'm trying to get a ve-rpm vs map history table created so i can get a base for a tune and the adx file doesn't have a value for MAP in kPa only map volts ... but it seems to have 2 map volt values...
  11. Thread: Hello

    by impala68
    Replies
    4
    Views
    3,300

    TY dave well i'm working on a 1995 cavalier...

    TY dave

    well i'm working on a 1995 cavalier circle track car

    i just did a fresh built 2.2 OHV with a stage 1 cam, roller rockers and some headwork (shaved 4 cc off head and very mild port...
  12. Thread: Hello

    by impala68
    Replies
    4
    Views
    3,300

    Hello

    hello all

    i have been lurking for a while trying to read and learn ... but now i had to register because i need some assistance from those more knowledgeable then I
Results 1 to 12 of 12