16148 im running windows 10, the only option see is at the top right of the parameter tree, im new to all this so any and all help is welcomed

is there a way to get the parameters i want to change i a group together instead of having to scroll the entire parameter list to find them, i know i can open the window for each one but is there an...

good deal, the link helped. im green in the tuning world. i found an interest in the tbi system for my 385 fastburn and took the leap,sure i can just slap a carb on it and go but what fun would that...

i found it and changed it to aa will that allow for the tunerpro to make live changes. before i changed this the truck was unresponsive to anything that was changed.

so now that the truck is back in emulation it runs but idling around 1600-1700 rpm. my question is can i delete the error flags and are these stored codes so to speak.

that fixed it!!! it will run fine on the factory chip.... yuge thanks. this is a lesson learned that i will soon not forget.

emulation was green and the truck was running on emulation but with a high idle so i shut the truck down to check the throttle return just to see physical state then koeo good cec light tried to...

ok dumped old bin,xdf,ads files and loaded new bin,xdf but for some reason i cant get the ads to load(operator error im sure) but still at key on both injectors will dump fuel and flood the motor...

thank you. ill look for it, im in the learning stages so im sure ill have more issues to work out as i go. i did manage to grab some data log so i guess im moving in the right direction.

is that a setting in tunerpro or autoprom

ok... i think i have an issue. downloaded my xdf,bin and ads should be stock files,installed my g adapter in the truck (95 c1500 5.7 with7427) memcal, truck ran but with high idle 1500rpm+\- shut...