Yea I just found out Having tuner Pro and the ALDL cable isnt everything I need. I also need a Chip Programmer a G1 memory adapter and a Chip. I didnt realize this. Though I finally get the DA to...
Type: Posts; User: Dolsey056
Yea I just found out Having tuner Pro and the ALDL cable isnt everything I need. I also need a Chip Programmer a G1 memory adapter and a Chip. I didnt realize this. Though I finally get the DA to...
What The HELL does this have to do with cars and who Erases the Moronic post?
Alright So I had a 350 bored 20 dropped in with hyper flat top 4 brow pistons, and Edelbrock performer intake, roller tip rockers. I got the aldl cable and downloaded TunerPro but its not connecting...
Right now its a 305 with the 4l60E behind it. 3:42 gears. Going 350 bored 20. Performer Intake, Headers cat-back single 3inch, TBI spacer, RV cam, roller tip rockers, hyper pistons.
Hi its my 1994 Chevy 1500 I have a 350 modified going in hopefully next week. Will be using TunerPro to adjust it in better. But my Question is how to remove or bypass the Speed limiter. The Truck...
My 94 chevy 1500 5.0 basically stock except tbi spacer and headers into a Dynomax 3 inch single. Going to be a 350 with flat tops hotter cam, roller tip rockers, 194 heads, and an Edelbrock 3704...
Might be an Idea to consider. Just have to find out how much to ship and what will I need to drop it in. He mentions the Sending unit.
This is the motor http://raleigh.craigslist.org/pts/4421515565.html
K so I decided to go a different route and am Buying a 350 TBI bored 30 over complete oil pan to valve covers minus intake. I plan on putting an Edelbrock 3704 intake on it and my Throttle body with...
Fast 355 do you have any suggestion on which Valve springs would work best on the Crane 272?
Okay so download the Tunerpro program, Buy the ALDL cable, install cable and do some reading on the files? And yes its the 4L60E. and the cable I need to buy is the one at ...
Now is the Cam going to be computer controlled and if not how will it effect it? thats the other thing I was curious about is if I have to stay with a computer controlled cam.
Okay So I will hold onto the heads for now until I possibly either bore out and rebuild the bottom end or just start out with a 350 block. So pretty much keep the 63965 and how hard is it to tune...
Hi I have been working on or around cars since I was 9. Im from Rochester NY but moved to Durham 6 months ago. I have a 1994 Chevy C1500 305tbi that Im currently working on. Im used to pre 86...