Slowly getting this figured out but think I need a BIN file for 5.3L manual trans 4x4 OS 12579405 stock or modified for 1841 cam would be great. Anyone got one to share or can point me in right...

I think it is against the rules to have multiple accounts �� lol jk doesn't take a rocket scientist to realize where the majority of the help came from and I thank you Sir.

I had a JK Jeep Rubicon back in 2007 with the 6 speed manual and one of the coolest things about that rig was the fact that it would go anywhere. Even more impressive was that in 4Lo and first gear...

Up and running with 02 sensors hooked up and just a matter of tuning at this point. Thank you very much to all for all the help and advice you are Much appreciated. I have a tuning g question but I...

As soon as i finish replacing kinked fuel line and adding new filter i will do just that and let you know.

So I'm seeing A/F starts out at 0 and then steps to 3 then 7 then 14 during cranking with spark advance at 24 and not getting anything. Fresh plugs going back to pull them and clean check gap and...

Post your BIN!

Seems to hover around .44705 V ??

reply to #12 No leak found

At this point it is not running on any bin. Going to pull and clean plugs again they were fouled beyond fouled last time it was doing this. When you say reset the fuel trims what do you mean? Sorry...

Ok so no XDF file I have been working with universal patcher and have not been prompted for one so IDK about that, Nothing to share. Of the three BIN's V2 is probably the least abused and 006 is a...

Not sure how to post the BIN I am using but i have either fouled the plugs or just gone way out of range.

Got it to idle at 1200 but had to shut it down for the night. Heading back to check for vacuum leaks and run it/tune some more. It's a sloppy stage 3 cam if anyone has any more suggestions for...

Yeah I am making progress on it still won't idle but I need to verify no vacuum leaks first thing then I will see if I can't post up my bin for you guys to check out l. Thanks for all the help

Steveo I think you are dead on right. my problem is i have obdx cable and tuner pro and ls droid and universal patcher and tuner studio and no idea how to use them.

Agree fully with all points from all. Let me clarify a bit. I went to DeAnza Auto Tech when i was 16 for 3 years and have been working on cars my entire life. This is my 4th "frankenstien" project i...

Ok I will run thru the list and report back but just a few points to add. Wiring harness is swapped from the 03 there is no 76 wires left on the truck and I ran multiple grounds I understand the...

Hi guys I am a long time reader first time Poster my name is Brian. 46 in cencal doing a 5.3 LM7 swap on a 76 gmc shortbed 4x4 6" lift 35" tires 4:56 gears with trutrak lockers front and back NP205...