I think a couple people recomended the older driver, I just pointed you to the thread and info thread of the people who found the issue!
Have to give credit were credit is due! :thumbsup:
Type: Posts; User: EagleMark
I think a couple people recomended the older driver, I just pointed you to the thread and info thread of the people who found the issue!
Have to give credit were credit is due! :thumbsup:
Here's the link to installation of cable to TunerPro RT plus the update and links to problems found with new drivers. Read carefully!
...
$4f
http://www.gearhead-efi.com/Fuel-Injection/showthread.php?521-1228747-ECM-Information-4F
You have to understand we discuss and bounce ideas and use everyone's expertise. One thing we never do is offend anyone. So you took this wrong.
We also don't allow bad attitudes. So lose it or...
1227747 = No 10k...
10K is rarely needed to start data flow on 160 Baud, on most it will put ECM in ALDL mode which really messes up data. I've never seen another module on a 160 Baud?
I'd be intrested in your...
Laptop and cable with TunerPro and the ADX file. Start engine and record data, save when done. Now since your LT1 is a conversion the ADX file may not connect, it may need some things taken out. Give...
Right click on the TunerCat Winflash icon and choose compatibility mode, look towards bottom for Change for all users and click, use windows XP service pack 3, OK, exit and give it a try. Have cable...
Playing with cables and making cool stuff on the bench is fun. But if you want to record data and tune cars then cables are cheap tool!
Trying to get RedRiver to advertise here so we have good...
You should build cables and advertise here?
Hmmm? That's one I did, but never had a reason to change that and the latest version is set to 4800 baud no echo... I've got a truck here to tune and will test it to be sure. If it works OK I'll...
My $42 ADX file is that way, not sure how yours was differant?
This 10K needed for 160 Baud ECM is a horrible rumor created on internet that won't go away! Even the Moates website shows 10k resistor needed for all 160 Baud ECMs. 10K really messes up good data on...
To easy! Does it work? Still to easy... and to cheap... :thumbsup:
Everytime you post that link costs me an hour looking around... :happy:
OK here's the start of OBDII flash, I did my part now someone needs to do the software......
Darn software...
OK that link was to much fun! Now all we need is a Uber Nerd to use one of these to flash a OBDII PCM?
http://www.sparkfun.com/products/9555
Robert in your spare time could you take pictures and...
Thanks Robert! Saw you looking into this awhile back. Got to be the cheapest way to make a cable on the net! :happy: