What?
I get SA data in my logs using the JimStim. FWIW, I do use both ref hi and lo.
Type: Posts; User: Six_Shooter
What?
I get SA data in my logs using the JimStim. FWIW, I do use both ref hi and lo.
I haven't had a problem getting a good tach signal from mine, with several different ECMs. The EST error is there, but I can simply get rid of that by adding a resistor that wire, just haven't got...
Why are you using the GM ICM with the JimStim?
Were you not able to go to ECM limit with the JimStim before? I have no issue going well beyond what the ECM is capable of with my JimStim.
I need to get around to building a VSS circuit...
Yeah I have had similar issues develop after a while. I plan to improve my bench with some separate pots to hopefully get rid of that.
I use a 5amp 12volt power supply. I plan to add a battery, but to be more of a filter, than something to power the system from.
Test benches aren't meant to simulate a running engine, that would take much more complex processors and sim software than is readily available. This would require math that would simulate burn rates...
Just a variable 10K resistor (pot), that is manually adjusted.
I just have the ESC pulled own to ground through a resistor. I'm not so worried about testing ESC, at this point.
Yeah, I've seen that stim, a bit pricey IMO, especially when a JimStim is so cheap...
Yeah, at one point, I was trying to find one of those, when I realized they were already long out of production.
The JimStim works great though. Just needs a few more circuits.
I have made and ECM test bench, that has been useful for testing code and learning about how ECMs function.
I started with a MegaSquirt JimStim 2.0, and have made some jumper harnesses for...