Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!

Search:

Type: Posts; User: Six_Shooter

Page 1 of 4 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    5
    Views
    424

    I have PM'd you.

    I have PM'd you.
  2. Replies
    5
    Views
    424

    Crossfire EPROM

    Crossfire EPROM
  3. Replies
    5
    Views
    424

    ECMs, ECMs, ECMs...

    I have FAR too many ECMs in my possesion and need to move these onto people that can use them.

    I can (probably) include a MEMCAL with each ECM, just let me know what it is you're working with, and...
  4. None of the vehicle functions will be affected,...

    None of the vehicle functions will be affected, except possibly the cruise control, I'll have to look up the wiring diagrams to refresh my memory. Even if it is, there are easy ways around that.
    ...
  5. Have you set the preferences in TP RT?

    Have you set the preferences in TP RT?
  6. Replies
    3
    Views
    321

    One way is to manually edit the bin file and then...

    One way is to manually edit the bin file and then add new items to the scalers tab to be able to edit them like you would anything else, but there is an XDF that has the patch built in along with the...
  7. Thread: MEMCALs

    by Six_Shooter
    Replies
    2
    Views
    588

    We have a forum way down at the bottom for this...

    We have a forum way down at the bottom for this very thing...
  8. Replies
    12
    Views
    1,189

    ALDLDroid uses Tuner Pro files and has a...

    ALDLDroid uses Tuner Pro files and has a customizable dash.
  9. Replies
    2
    Views
    578

    Both ECMs originally used 24 pin PROMs, 2732s,...

    Both ECMs originally used 24 pin PROMs, 2732s, there's also mention that they had 27128, 27256 and 27512s installed, but the 2732 is most common.

    Most user programmed EEPROMs will be the SST...
  10. Replies
    17
    Views
    2,925

    You will need to use a BIN that matches the PCM...

    You will need to use a BIN that matches the PCM you will be using. The '7747 BIN will not work in the '7427.

    There is a thread dedicated to the '7747 ECM:...
  11. Thread: Need help

    by Six_Shooter
    Replies
    5
    Views
    848

    The detect emulation hardware button is for...

    The detect emulation hardware button is for emulation equipment only, the ALDL cable does not fall into this category.

    You need to setup the datalogging side via the preference tab.
  12. Thread: Need help

    by Six_Shooter
    Replies
    5
    Views
    848

    Ok, just to verify, since you're description is a...

    Ok, just to verify, since you're description is a tad confusing, or maybe just not clear...

    When you say you "plug in your diagnostic cable", is that the one that connects to the ALDL, or the USB...
  13. Replies
    6
    Views
    1,104

    I don't have a way to UV erase. I had thought...

    I don't have a way to UV erase. I had thought about programming an EEPROM, but that won't solve the problem I have. It runs off the MEMCAL, it just runs very rich, due to the larger injectors with...
  14. Replies
    6
    Views
    1,104

    Well, I'm finally stumped... v.WTF?

    Well, today I went to tune an '89 Cavalier with a hybrid (frankenstein) 60 degree V6...

    Engine looks to be well put together, and the owner has taken a lot of time to make it a very clean install....
  15. It's a way to identify each BIN. GM used these...

    It's a way to identify each BIN.

    GM used these 4 letter codes (along with a 3 letter code that is pretty uncommon and early and occasion number codes). The letters themselves don't say anything...
  16. Replies
    4
    Views
    1,193

    Typically the ADX needs to be modified to...

    Typically the ADX needs to be modified to calculate WBO2 data correctly.
  17. Replies
    24
    Views
    4,122

    My bad, I read it originally as you had a second...

    My bad, I read it originally as you had a second ECM.

    I would still go over the harness, since it seems to be the last thing in question. I'm not saying that you did anything wrong with it, but...
  18. Replies
    24
    Views
    4,122

    Easiest way is to swap the ECM for a known good...

    Easiest way is to swap the ECM for a known good one.

    You can also buy engine simulators to connect to the ECM to bench test it and observe the diagnostoc data. I use a JimStim for this, that is...
  19. The best way to do that would be to block off the...

    The best way to do that would be to block off the existing IAC port and plumb the other IAC around the throttle body.

    The GM IAC has the pintle actually seat inside the TB, whereas the Ford is all...
  20. Replies
    14
    Views
    2,640

    Nope, not an open loop tune, that's not how you'd...

    Nope, not an open loop tune, that's not how you'd do it anyways...

    This has been known for some time that there is a particular "tooner" that does this.

    I just don't understand how people can...
  21. Replies
    9
    Views
    1,998

    Mask, bin, etc that your working with would be...

    Mask, bin, etc that your working with would be good to include, at least mentioning it would be good...
  22. Replies
    5
    Views
    1,945

    My experience with PLX was not a good one... I...

    My experience with PLX was not a good one...

    I never had problems with my Innovate controllers, but I sold them before I had a chance to have any problems. lol

    14point7 has been solid for me...
  23. Shouldn't be difficult to get better than that. ...

    Shouldn't be difficult to get better than that.

    EFI shouldn't need a manually set high speed idle...

    The only thing I see in your case that might cause issues in tuning is the single injector...
  24. With the addition of the IAC I would look at...

    With the addition of the IAC I would look at using a '7730, with either $88 or $A1. $88 for dizzy, $A1 for DIS, though either can be adjusted to run the other type of ignition. Since both codes can...
  25. Replies
    5
    Views
    1,945

    Look at 14point7.com They make inexpensive...

    Look at 14point7.com

    They make inexpensive WBO2 systems. I use them nearly exclusively, though I do have an AEM Failsafe in one of my cars (because I got a decent deal on it) and have used...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4