That's cool. I'm just looking for a plain black background. That way I can make gauge names black to hide them on ones I don't want the name for.
Type: Posts; User: Scrufdog
That's cool. I'm just looking for a plain black background. That way I can make gauge names black to hide them on ones I don't want the name for.
Any way to do a custom background, or custom color?
of the people in this thread, who has this set up on a permanently installed tablet, with a micro usb splitter working with a charger and an obd adapter at the same time?
What device and ROM are...
I know its a bit of a dead thread, but I'd love to know how the intake piping is routed...
Life...
Finally got back to read up. I'll just run a long data log this weekend and adjust my tune. Trying out some new tranny shift points too.
Thanks
So I uploaded a test tune a couple weeks ago, and then... Life. SO I've been driving on this tune the entire time, mix of city and highway. At this point I'm assume the stored BLM's are pretty spot...
Got that worked out, was messing with it today. Found a thread on here that helped.
Been awhile since I messed with tuning and TunerProRT. Finally got some family issues handled and settled after a year of issues and it's time to get back to things. I installed long tube headers and...
Glad it worked out.
Yeah, going to the driver site it indicates that the linux drivers are built into Ubuntu Linux at this point, so it seems to be another problem.
You think I need to install an AutoProm specific driver? I figured if it saw the FTDI then it was good to go. Will try that within the next couple days and see if it helps.
Got myself an Acer C710 Chromebook that I hacked/flashed and installed Ubuntu 14.04. TPRT runs fine using WINe, but cant see my AutoProm. Added the COM1 line in dosdevices and tried adjusting the...
I've checked all that I can find. I'm still going through everything again to make sure I didnt miss anything. I've been concentrating mostly on scalars, need to dig deeper into the tables.
it seems that when it kicks in, in between 1600-1900 RPM I'm getting up to 6 degrees of knock retard. Obviously there may be another underlying problem, but I'd like to keep things under control...
is there a way to limit cruise advance on a 7427 $31 ?
So, messing with that just made it idle bad, took away a lot of the advance when I change 0 degrees to 20 degrees, so still looking for the problem.
For the moment I set Max SA to 36 degrees,...
Ok, so I found something odd.
Under Derivative Spark/ Fuel RPM Control Parameters
Transient RPM Idle Spark Correction Bias = 0.0 degrees
Maximum Idle Spark Correction = 14.8 degrees (pretty...
Watching logs, I'm trying to figure out why my spark advance bounces off of the 41.8 degree limit I set, or just is much higher than it should be, fairly frequently.
Examples...
1700rpm, 37mph,...
I just ordered one of those DIY ALDL chips. I'll get it working on it's own then see how it goes with another device connected, and with or without the TX pin connected.
If the TX/RX set works like a standard CanBUS, wouldn't additional devices with unique IDs work all together? Say an AutoProm and an Android device with adapter. I'm going off of how CanBus acts with...
I have no coding experience, and wouldn't have the slightest idea where to start. I understand what you mean though.
Well, I'm thinking about starting a custom digital dash to replace the stock dashboard in my Burb. I'd like to use 2 or 3 separate Android devices to be able to fill all the room where the stock dash...
Took some time today and worked out my first custom dash. Not quite what I designed on paper, but pretty close.
The oil pressure, fuel level, and WBO2 will be done on the 3 channels of the...
Working on a custom dash. Was curious if there was a CEL bitmask on the 16197427 $31 ? I might be missing something in the adx file.
Any idea how many ALDL cables could be connected to the data port (spliced in) and function? I'm working on a project that would require 3 devices to be connected at once? Seem like it might work...