Search:

Type: Posts; User: 84Elky

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    48
    Views
    4,520

    New VE graph is fine for now. Don't worry about...

    New VE graph is fine for now. Don't worry about it. Given where you are, you have to use the KISS (Keep It Simple Stupid) principle and one thing at a time.

    Nothing should be done until you get...
  2. Replies
    48
    Views
    4,520

    The wire from the sensor should be directly...

    The wire from the sensor should be directly connected to Pin F9 at the ECM
  3. Replies
    48
    Views
    4,520

    5.7 knock sensor is correct and should have about...

    5.7 knock sensor is correct and should have about 3900 ohms resistance (sensor to block).
  4. Replies
    48
    Views
    4,520

    Drew --- If something mentioned here you...

    Drew ---

    If something mentioned here you already know, apologies. Just trying to be thorough.

    Many issues, few of which can be determined by looking at a xdl log in TPro. This is the reason a...
  5. $6E WBo2 AFR Patch-Report Missing MAT and Add MAF Voltage

    These instructions apply to any $6E BIN with the WBo2 AFR patch (ARAP, APYP, etc.). Thanks to MikeT88IROC350 at ThirdGen.org for testing these changes.

    When reporting of WBo2 AFR was added,...
  6. Replies
    7
    Views
    1,016

    Tks for update. I too have had cable issues, but...

    Tks for update. I too have had cable issues, but replaced with a new one and all OK. Failing cable worked for years and all of a sudden started providing random data. Really weird. Had one pin with...
  7. Replies
    48
    Views
    4,520

    Yes, but you need to make a log first, while...

    Yes, but you need to make a log first, while idling and running at various RPMs for a while, all in Closed Loop. Then post exported log .csv file and bin.
  8. Replies
    48
    Views
    4,520

    Just replace non-zero values with zeros and save...

    Just replace non-zero values with zeros and save it. However, might save-as so always have bin before and after changes. Applies to any changes you make. And keep written notes that accord with a bin...
  9. Replies
    7
    Views
    1,016

    One glitch is one too many. By any chance, are...

    One glitch is one too many. By any chance, are you using a ZIF socket in the ECM to connect the cable from the AutoProm? If so, Moates does not support that method of connection. It will work, but...
  10. Replies
    48
    Views
    4,520

    Yes, but apologies. What you are seeing in the...

    Yes, but apologies. What you are seeing in the pics is from the S_AUJP v7 XDF. Descriptions change among versions of XDF files. That's why the addresses of XDF items should be used and that's that I...
  11. Replies
    48
    Views
    4,520

    Difficult to read pics. I assume you want to zero...

    Difficult to read pics. I assume you want to zero the Low PW table. That would be the table in the left pic below.

    Voltage offsets (right pic) should not be zeroed. Rather, see the info below if...
  12. Replies
    48
    Views
    4,520

    Zero is correct for $8d representation of 8 cyls....

    Zero is correct for $8d representation of 8 cyls. Here's the text from the S_AUJP v7 XDF:

    VERY IMPORTANT: If changing this value from 8 cylinders (0), you must also change the entry at 0x293=ERROR...
  13. Replies
    48
    Views
    4,520

    Drew1992 -- Has this engine been running with...

    Drew1992 --

    Has this engine been running with an existing BIN or are you just beginning? If the latter, the BIN Dave provided is a good starting point. Spark may be a bit high for those heads and...
  14. Installing Bosch III Injectors Without Voltage Offsets

    Long post so please bear with me. Many replace GM factory Multec injectors, and others, with Bosch IIIs (B3)s of various flow rates and worry because they don’t have B3 Low Pulse Width (PW) and...
  15. Replies
    9
    Views
    1,600

    Will need 2007 or higher.

    Will need 2007 or higher.
  16. Replies
    9
    Views
    1,600

    Unfortunately this won't work Dave, but thanks...

    Unfortunately this won't work Dave, but thanks for the post. Macros are not supported in the Web Office version. Grrr.
  17. Replies
    9
    Views
    1,600

    Thanks for the feedback. Yes, it will...

    Thanks for the feedback. Yes, it will unfortunately not run on any of the open source platforms (discontinued OpenOffice, LibreOffice, NeoOffice, ApacheOffice, etc.). This is because of differences...
  18. Replies
    9
    Views
    1,600

    You can try it with OO, but it's not guaranteed...

    You can try it with OO, but it's not guaranteed to work because despite being an Excel clone, some operations have been reported as being different. But please try and report back. Also note that...
  19. Replies
    9
    Views
    1,600

    Log Analyzer Quick Tuner -- Tuning Made Easy

    Attached is an updated Log Analyzer Quick Tuner program. Any .csv, .xls or .xlsx log file that contains BLM and INT with 128 as the base value is analyzed in just a few seconds, providing data to...
  20. Thread: File Upload

    by 84Elky
    Replies
    0
    Views
    1,522

    File Upload

    Hi Guys ---

    Unable to upload a zip file regardless of size. Tried several times with different size files. Rebooted and still no luck.

    Any ideas?

    Thanks.
  21. 1Proj -- Agreed. Thanks for your suggestions....

    1Proj --
    Agreed. Thanks for your suggestions. They along with others were considered during development, much like what was done in $12P with a staged shutdown if issues. But had to end somewhere to...
  22. Unlikely to add anything. Looked at what GM did...

    Unlikely to add anything. Looked at what GM did with the Buick GN turbo thinking using PWM for the solenoid would work by mirroring the CCP or EGR logic. But the GN is basically a somewhat dumb...
  23. S_AUJP Version 7 - Now Supports Turbo (August, 2021)

    Revision 2 November 22, 2021
    Provides:

    C4 Corvette CCM Commands.ADX


    For these cars, includes the CCM Commands that must be added to the S_AUJP ADX.


    Updated ADX files to allow cars with...
  24. Replies
    27
    Views
    10,197

    OK, here's a solution but it's not elegant. I...

    OK, here's a solution but it's not elegant. I have simulated it to ensure it works. But CAUTION:
    THIS SOLUTION ONLY APPLIES TO THE LATEST PRODUCTION RELEASE OF S_AUJP: S_AUJP v6-28.BIN...
  25. Replies
    27
    Views
    10,197

    If you are not proficient in assembly language...

    If you are not proficient in assembly language programming and don't have the ability to assemble the code into a bin file, ti is not possible. Perhaps if you explained exactly how it is working now...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4