try this link, https://www.sprperformance.com/technical-info

Look under fuel injection calculator.

I am far from even being able to say I know tuning, but recently while messing with a Sniper EFI unit with Hyper Spark and trouble shooting a high idle issue. We noticed that the sniper in trying to...

Here you go, Solman is a good guy.

http://www.lt1pcmtuning.com/tips/

Ok my next thoughts would be

1) How old is distributer?
2) How old is the knock sensor? I have never seen it but have read, headers can give false knock sounds, I have also heard old sensors can...

Ok from what you say the first thing i would check is the timing, have you checked it? and have you made sure it was check with the computer unplugged, so you get correct base timing. Timing being of...

Tuscan, the link to spread sheet is in post 10 of this message body.

I am new to this and looking at your chart, I think your advance is ok, if this is the base table of program or is this a table...

Dave when looking at your snap shots, is the lower chart a count of data points? It appears to be running rich, is this what your pointing out?

Dave does your program/analyzer show what engine...

Here they are

I have a bone stock 95 K2500 350 TBI 4L60E Trans with 373 gears, I happen to make a data log a few weeks ago, to learn how using Tuner Pro.

I will upload CSV later tonight and the XDL file, it is...

Due you want CVS file? what tuner program are you using

I am trying to do some home work for my future tune. I have a 95 Truck 16197427 ECM, I have built engine with Dart Heads, stock TBI intake with bores opened for Bored TBI, etc. Now the cam I used is...

So for a 95 Chevy Truck, 16197427 ECM, is EEHack a better option, I am not tuning an LT1

Ok here's my newbie question, what is benefits of EEHack vs TunerPro Rt? I know TunerPro will data log and upon playback it will show BLM Fuel Changes, Timing and Spark knock counts as well.

My...

Ok got Everything to work, for some reason I need to do a software update on Tunerpro.

Got upload to work

If anyone is will to share there email via message I can email zip file to them, to confirm its the loose nut behind the wheel.

Ok I have Tuner Pro installed, I have loaded a bin file, XDF File, and ADX File. When I did this I had parameter tree, scales tree, and Flag Tree.

Then I made a data log, now I can play the data...

My order arrived today no issues

I am happy to report, I have received a shipping confirmation for my order from CFM.

I just seen this and well, I wish I would have seen it sooner. I just ordered from them, it says my order is being processed, so I will let you know.

I was going to use RVMorse but I learned he...

Well after spending sometime reading and clicking, I think I answered my own question.
The gauge setup Dave reference's seems to be a simple system and the gauge itself is the controller and will...

I tried to edit my post, system would just clock.

So I found the install paper work for the O2 Gauge and it is 4 wire, I have the wiring info, but again why gauge and not just the O2 sensor?

Hello, I am missing something, I have been reading this post with focus on installing a wide bad O2 for tuning.

A little more info, I am playing with 95 Chevy truck, so I am pretty sure pin 16...

Ok so I am new to this game and can see I will be needing to learn at lot of new stuff in tuning, So I am thinking Ii will goto u pull it and get a ECM as my test mule, My first thoughts is to get...

Hello to all GearHeads, I would like to say hello and that I plan to learn a lot from this site. I am not new to playing with cars but am final starting to cross the carb to full on fuel injection...