Oh wow, awesome! Thank you for the detailed response! Good to know the command was doing what I thought it was; I just had no idea about the amount of cycles required. I'll go ahead and use the 27 00...

So I noticed while working on my car today that when I loaded the BIN I'd made on my desktop onto the laptop I use for flashing, the copy of TunerPro I have on the laptop said the patch was...

Sweet, great job! Thanks for the fix, I know how much of a mess moving domains can be. Looking forward to the new projects!

Again, I don't know about your truck, but the Corvette didn't get the ability to bleed ABS with a scantool until 1995 with the introduction of the Bosch 5 ABS unit. All previous units had an actual...

Where are you located? I have a '94 and '95 Corvette, and have dabbled with those sorts of commands. I don't think the ABS on my cars is the same as what's in your C1500, however, so the commands may...

Yep, looks like the file is broken. I'm sure steveo will have it fixed in no time, but for now, here's the prebuilt 1.5 release.

Okay cool, I wanted to make sure. 84Elky noted the 8-bit limitation in his description as well, but that to get around it, GM engineers had the routine run twice back-to-back so it could get twice...

So the Injector Offset Adder is the only table in $EE that I'd need to worry about? Sweet!

The injectors aren't stock GM, but they do have really awesome data. I got them from FIC, so they have...

So, question about the LS Injector patch for kur4o. Do these three tables override all the injector-related tables in the $EE Air-Fuel Metering category? So after applying the patch I'd only need to...

Again, very helpful stuff. Thank you both for the knowledge!

No offense taken! Here's a calibration from a 1994 Skyline GT-R as reference.

17630
17631

It's in Japanese, but the adjustable values in the ECU are as follows:

K Constant: This is a...

I don't think fuel control is from O2 sensors only; I'm just used to a completely different computer environment since I primarily worked with Japanese cars instead of American ones. Or rather, my...

Sure, but that doesn't answer the question. Without the ability to have any kind of precise AFR feedback, how is the PCM "targeting" a specific AFR? What is $EE using to determine AFR if not a lambda...

While we're on the subject, what exactly do the "AFR Target" tables do in $EE? We only have narrowband O2 sensors, so it can't be querying a wideband for precise AFRs. So what are these tables...

Nice! Congrats on the move. Time to update your signature here too! ;)

Any chance someone is willing to work on a patch to enable flex fuel interpolation? As you may be aware pump E85 isn't necessarily 85% ethanol. While here where I live it's mandated to be 85% via...

Torqhead's advantage is that they can sell you the entire kit (including the PCM you'll need, the harnesses you'll need, and if you want, the coils and coil brackets you'll need). They also support...

You are correct that it would not work, but for the wrong reasons. 94-95 is still OBD1. OBD2 was not introduced until the 1996 PCM.

The only potential way to swap the 94-95 PCM onto an older car...

You can retain the twin sensors, but only one sensor will be used by the knock filter unless you wire the two sensors together. The 94-95 PCM only uses a single knock sensor input wire (D22) while...

In my honest opinion, if you have an $EE car, then TunerPro never caught up. There is no better realtime tool for $EE than EEHack, period, end of story.

The only thing you'll need TunerPro for is...

Trimalyzer can be set to use WBO2 instead of trims, yes.

https://fbodytech.com/trimalyzer/trimalyzer-faq/#Does_it_analyze_wideband_data

Those filters are in Trimalyzer, not the EEHack Analyzer. I highly recommend using Trimalyzer instead if you're doing tuning work.

EDIT: Apparently the problem is going from 94-95 to 96-97, but not vice-versa. Whatever changed in the 96-97 ICM apparently doesn't piss off the 94-95 PCM. But a 94-95 ICM will piss off a 96-97 PCM....

Are you sure it's the right PCM? If it's been so heavily modified, isn't there a chance someone swapped ECMs too? Having a totally wrong XDF would also explain it.

But agreed with kur4o; just post...

Ah, fair enough. Guess it's yet another thing for me to experiment with on my own. I enjoy that though so, hey!

It took me a second to figure out why "key-in+key-on after CCM sleeps" would be a...