I've had some ups and downs, but the new problem is the timing advance. . . Truck is running pretty decent, and I've read all the timing advance posts, but the problem came after eliminating the EGR...
Type: Posts; User: Philalbar1
I've had some ups and downs, but the new problem is the timing advance. . . Truck is running pretty decent, and I've read all the timing advance posts, but the problem came after eliminating the EGR...
Here's an update
https://drive.google.com/file/d/12hOFHQV02ntZOVu-umOkG8X2Sd0NEV4J/view?usp=sharing
https://drive.google.com/file/d/1gfwE-Gke7ZI4TJm5XjbnSaAgLW3V_c2s/view?usp=sharing...
EDS, yea man, my first "real" tuning experiences with cars was on my 1980 El Camino. I fought with that ol' PITA for MONTHS trying to get the carb to act right at idle and WOT. Lots of metering rod...
57, I got the code from the $E6 page that Mark put up, and just followed the instructions. I've got like 9 iterations of bins right now, as I'm trying to get my tune to work with a 5 speed...
1Project, I was kinda wondering if that "hang" as you called it, was a "normal" side-effect of the ECM and TBI setups. I might not be doing things "correctly" as a professional tuner would, but I was...
1Project2Many, you were spot-on with your EGR suggestions. I fixed those two (which were both wrong) and the surging/jerking stopped right away, which left me with the same ol' issue. I bought myself...
Welp. . . Took her out tonight with the $0D tune in her, and she idles down and shifts like a DREAM under 2000 RPM, but there is a terrible jerking studder if I hold her around 2000, and she is still...
That's a very valid point LOL, I didn't look at the 92 ECM that hard, and I've been running on about 5 hours of sleep since Saturday. I think I posted a pic of my memcal on the previous page, but I...
Thanks Stew, I actually found an updated e-fan code just down a couple posts from your referenced post #8. I appreciate the help there. That keeps me from having to mess around combining masks and...
Okay, thanks! This may be a stupid question Jim, but do you think I could still use my e-fan "mod" that comes with the $E6, or is there one for the $0D? Can you mix and mash between two masks on the...
I'm to the point right now burb, unless someone needs this 16144288 ecm for a stock 92 S10, and it could help all of us (potentially) by grabbing the .bin file, I'm down to desolder it and pull data...
Wait a second, the ECM that came out of the transmission donor truck is an ATAR (16144288) ecm. It also had a TBI 4.3. . . Have I just been being an idiot this whole time? Could I desolder the prom...
Understood. I just wanted to make sure. I have become vaguely familiar again this evening with the compare tool in TPRT. I tried setting some of the idle values down, and it helped a little for RPMs...
So. . . I took the truck for a ride around the neighborhood tonight, and I was wondering if anyone could look this recording over and see if anything sticks out that I could adjust to get her to idle...
Where in the realm of impossibility can I find these magical compounds my fearless leader??? Please guide me in my quest! :laugh:
I'm honestly at a loss at this point (again) as to how to proceed...
I just used TunerPro RT to read the factory prom, and this is what I got. I don't know if it's any different. If you think it's still a read error, I would like some instruction as to how I should go...
I also got pictures of the build codes just in case you were interested.
Well darn, that's unfortunate. Hopefullly I can find a manual trans bin that will work somewhere. . . As to the file I uploaded, it was directly off the chip that was in the ECM when I bought the...
Is there another way that I could try and get it to you? Would it be easier if I copied it through TunerProRT? I don't think I damaged it when removing it from the memcal. . . I made my own adapter...
I'm hoping I got this right with Flash&Burn, but if it's not, I will keep trying. . . I selected the 27C512 (Read-Only) chip and copied the buffer into this file: (First time trying to upload an...
1Project, That's what I was finding, and trying to locate the MemCal that fit my cluster of an apparent Frankenstein was proving more than difficult. I came to the same conclusion on the M30 trans,...
I just pulled some BCCs out that matched what I had started looking for when I started trying to tune this mess way back. LOL I punched my Vin into the tis2 and came up with EXACTLY what you came up...
That's what I was afraid of. I know that the 93 was a bastard year that flipped between the 4L60 and 4L60E. I think they made a lot of changes since the electronically controlled trans needed to...
1Project2Many, Thanks for replying, but I misspoke on that initial post. I have tried the BCPM bin in the past, and have run into lots of little problems with the California edition having all the...
Hello everyone, I have a 93 S10 with a TBI 4.3 V6. The 4L60E crapped out and I was able to buy the truck super cheap! I haven't had the best of luck with GM autos, so I also bought a 92 parts truck...