I would have to fire up the laptop, and check a log, but I am pretty sure I was hitting around 38% (would really be around 80%) and IPW would not go higher than 4.2ms, which is fine at 4K rpm but not...
Type: Posts; User: gregs78cam
I would have to fire up the laptop, and check a log, but I am pretty sure I was hitting around 38% (would really be around 80%) and IPW would not go higher than 4.2ms, which is fine at 4K rpm but not...
I'll take a look at it. Yes they fire just like regular TBI, just alternate opposite of each other.
EDIT: Looks pretty good Mark, you're right that first page is a lot to take in. Only...
Ok, so to simplify = X * Y / 300
My $0E shows X*Y/600, HHMMMMMM, I might need more pressure after all.
Just to double check the Advanced $0E that I am using, what should the conversion/equation be?
So you want to see the equation that the ECM uses to come up with Injector PW?
The only way to know what 100% Injector DC is, would be to use the same equation that the ECM uses to calculate Base...
Well yea, I was just saying that the math is done this way, to get from 75% to 100%. I have no idea what the real correlation is or how the ECM will change the Injector PW.
Actually in this 75% DC scenario you would want to multiply your BPC by 1.33333. Basically the inverse of number. As an example lets say you were at BPC of 75, and were hitting 75% DC, you would...