Ok I think that did it. Afr responds to table changes. Got cruise speeds in between 13.0 and 15.0, idles around 900 @ +- 14.2 soooo YAAAAAY!!! Gotta figure out wb now:-( thanks everyone!!!!!

I found a post on code59 forum by "john" labeled "some code59 and dis info" it basically says to put zero in max advance and -60 in max retard (min advance) and that seems to work. It has the bass in...

Sorry, I haven't had much time lately. Changed the bin Couple times sense latest log, that esc flag, fjo wb table needs to be set in both, the table was close under 14.8 then does not read above...

If anyone has time could I get someone to look at a log or 2? I really don't know what is good info. I can read afr or Blm and the very simple things but there are many gauges like the IAC step...

Changing the 6.25ms or 3.125ms IAC option didn't change anything:-(

Ok so I played with injector offset vs battery volt and got it to take changes from 've table but nothing....absolutely nothing I have tried will get it idle below 1200 rpm except when fan comes on...

Ok 3 bar works. Idles at 31 koeo 101, got afrs stuck at 11.7-12.8 idling. F29x is what I'm changing and only seems to effect pw, it was 1.5 avg now is .5 avg. I read ur post about tuning injector...

I seen the accel ur talkin about but this one $79 with shop discount at oriellys, bwd brand and it's here in town so any problems I got a quick remedy :-). We have been getting very poor quality...

I tried 1 bar and only shows 0 kpa in history tables with both map sensors. Yea deff way off but found what is suppose to b a 3 bar from a 1989 firebird 3.8turbo, gonna check again, at oriellys up...

Ok it started!!! And got it to idle with a hunt, didn't have much time to mess with it tho. I used wyosyclone bin to start, put my stuff in and left the ve table alone then had to pull whole table...

it probably was your post six shooter, I read several with you in them trying to figure out how to get this thing switched and set up. Your right I forgot it's bpw vs egr I think but thought I read...

lol I didn't plonk....sorry I left some stuff out. I swapped constant, timing table, idi ignition settings, tried injector offset vs batt volts but it only saves zeros when I set below a certain...

Oh yea I'll search around for a conversion tool, I didn't know there was such a thing, that would b awesome too!!

I was surprised it ran too!!! I spent some hours goin over the code59 .bin didn't c much to change in afr settings but ve was way up there!! I switched everything i could find that the instructions...

I resently switched my fiero with a 2.3l quad-4 1990 ecm to a 7749 using a code59 bin from a turbo 4.3l v6 s10. First drive was ok but to rich. After a mile or so it wouldn't idle, just dies when...