Some time ago lots of file got lost, during site maintenance. I am referring to a file that get lost.
Type: Posts; User: kur4o
Some time ago lots of file got lost, during site maintenance. I am referring to a file that get lost.
Looks like we are talking for the speed density AE patch.
Here you can find the latest xdf and a link for the modded version for the eehack program.
...
I was also thinking about some rpm modifier for eoit target, but refreshing that realtime will be useless. Since there is some scalars so eoit target don`t jump off like crazy but update slowly...
Any feedback will be greatly appreciated.
If for some reasons pcm reads less voltage than actual, I have some other versions that can be run. Reading voltage directly from injector circuit, on a...
3891 (FF) is 8 bit limitation, so that is the max you put for these cells. I guess they are in very unusual conditions so you don`t have to worry about it.
I suggest you apply the
low pulse...
You can apply the low pulse offset adder separately. When applied all tables for fueling comes from patch, so that is the only ones you need to adjust. I think I added some math conversions in the...
The latest modded eehack is available here. No need to reupload, but the xdf opens as a png dot so here it is.
...
These are now part of the modded version of eehack. Or you need something specific. I have too many version laying around, and not sure they will help.
That patch never become public and there is no xdf in existence. Currently is too hard coded with other custom stuff and extracting is not on priority list.
The existing patch have some stock...
The traction spark retard table can be used for nitrous retard. It even have some blend out with timer when retard is over.
If you don`t have a vette car with Traction or other platform with...
That is great news. Can you give more details on final settings. It can be tuned in maf mode too, since on light cammed cars it bogs down too.
If you haven`t noticed yet, it also works backwards,...
124b4 Derivative Gain Vs. Coolant Temperature
This one is the multiplier table corrected with baro multiplier 126af HIGH BARO TABLE. The result is used as a multiplier to the main table.
You can play with the multiplier table and ramp out to keep it longer in effect. I noticed some vette calibrations have these bumped up a little.
Made some quick patch to enable some of the maf correction in speed density mode.
Look in the pumpshot category @air fuel metering.
Added some better description too. The 12406-1240a are not...
The wideband patch allows you to use some of the free pins on the pcm to log 0-5v. It just change some of the datastream byte to enable logging it.
I think some other guy add it to the xdf and...
I was just doing some clean up of the xdf laying around and include the patch. Hope you have a way of testing it first on some really low trans temps to confirm it works.
Enjoy
You can check in a vette bin how this are set, since on other bins they are maxed out. That way you can have general idea how to set them.
The timer is some simple one. Wait some time before you...
1b15 trans temp 0.75*x-40
1bd oil temp 0.8*x-40
fan1
change
86ae-[01bd->1b15]
tune
2657 x*25 rpm threshold for fan1
There is already an engine oil temperature fan control in the code. It is used on vette applications. I can repurpose it to be trans temp control if that suits your need.
It will very easy patch,...
12A11 * Open Loop AFR Target
With this table you can set the afr target based on map vs collant temp. Usually the map column that you have at idle will be your idle target.
After that you can...
Apply patch and save bin. Than configure
max MPH THRESHOLD for forced zero TPS Open loop
to your preffered settings. 4-6mph is the way to go. It is really needed on deceleration with throttle...
Definitely use the v2. It is much better and you can add a mph threshold for low speed open loop too. I run it with 5-6 mph threshold with great drivability.
Switch the xdf to category view to...
No idea about the format. Open an xdl in hex editor and look for some patterns.
These are the latest files I have.
The xdf contains the zero tps open loop patch V2. Tested and working good.
Now the latest eehack exe contains all of the available patches[v5], so what you need...
Apply the patch labelled "Log pin D31 on AC pressure channel [Wideband patch]" and at the AC pressure you will log pin d31 instead of pin d12.
Pin d27 is already setup in the datastream so leave...