You only need 2 wires from your WBo2 to the APU1's ADC connector.
Analog signal voltage is normally 0 to 5v. Just need the Ground and Signal wires connected.
LC1: from...
Type: Posts; User: T2000
You only need 2 wires from your WBo2 to the APU1's ADC connector.
Analog signal voltage is normally 0 to 5v. Just need the Ground and Signal wires connected.
LC1: from...
If the wind & rain stops sometime soon then I'll throw a standard 1227808 ECM back into my "mobile testbench".
It doesnt have the SXR upgrade so it can only output 160baud from the standard ALDL...
Personally (if this was my problem)
To retain my last remnants of sanity I would pull the HDD out of the old PC or Laptop and put it into a HDD caddy.
Then just copy the contents of TP5 directory...
Are you using the same XDF and ADX that you have previously used?
Hi Mark;
As per my earlier post the XDF is http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=2456&d=1337727128"OSE12P V111 - 1,2 and 3 bar.xdf"which is an enhanced version of...
Try increasing Payload size by 6 and leave everything else unchanged - worked for me ;)
Hi guys, sorry for the late reply - I have done a fair amount of troubleshooting in the hope that I can resolve my own problems as well as trying to help with yours.
Good news for me!
I have...
Yeah last time I looked there is a big ditch full of water right between my place & your place :yikes:
Strange I am sure that my attempts at WB02 and ADC1/2/3 logging saved in the xdl file.
I...
"OSE_$12PV111_1BAR - Petrol.adx"
&
"OSE12P V111 - 1,2 and 3 bar.xdf"
& I have tried both (on separate vehicles):
"OSE $12P V111 APNX V6.bin"
"OSE $12P V111 BLCF V8.bin"
I certainly havent noticed the glitch or error in other logged data... certainly not the usual suspects anyway (RPM,MAP,TPS,SPARK etc)
The XDF and ADX is OSE_12P which if you are interested is...
Time to breakout the OZ dictionary,slang & abbrev then so that we can give you a real challenge :p
Welcome ppscavenger!
Again , many thanks for the excellent writeup.
It is really excellent & helped alot.
I finally got some data which is close... but I have one issue.
I can deal with offsets and factors to...
Sorry for the rookie question... but I am assuming that the body size needs to also increase by the same amount as the payload increase.
So we add 6 to both the payload and body size?
Great stuff - thanks so much for this!
I'll edit my ADX's and let you know how this goes.
Cheers, Chris
Thanks Mark!
I'll keep my eyes open for an update - appreciate your work on this as it has been a little frustrating not having that functionality.
Cheers, Chris
Hi Mark! Any more progress on this?
Hi!
Not a bad corner of the interwebs here.
I'm learning plenty from the folks here, hope you do too.
Welcome.
Great News!
Thanks for your efforts Mark!!!
From one newbie to another... g'day!
I'm enjoying my time here - hope you do too.
Also if you are interested in the opensource OBD Arduino as some inspiration and information ...
Maybe start here: http://en.wikipedia.org/wiki/OBDuino
&...
Try:
lcd.clear(); // clears the lcd display
lcd.setCursor(col,row); //replace col & row with the address of the data to be written
lcd.print('gearhead'); //replace 'gearhead' with the data to...
Sorry I was a little behind you with my earlier reply...
Check this out: http://www.delcohacking.net/forums/viewtopic.php?f=10&t=890
I know that this is getting a little off topic...
But out of curiosity I googled TunerView...
If this: 2328& this: http://www.moates.net/tunerview-ii-lcd-dash-kit-p-223.html
Is what you are...
Glad to hear you are working on this Mark.
I have tried almost every combo of address & offset and have been unable to get any usable data via the APU1's AD inputs :( .
Have tried ADX's from...
Cheers guys - & thanks for the welcome!
I'll try to contribute where I can and will keep you up to date with my little projects.
All the best!
Chris