Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!

Search:

Type: Posts; User: LSVolvo940

Search: Search took 0.00 seconds.

  1. Creating XDF for 12579405 O/S 2003 model year.

    Ok so I have been told that the XDF file for 12579405 does not exist. There are options as far as using a compare bin or using a 2004 model year O/S but there are complications with that, all I am...
  2. Did find a spare board that had 2 .68k resistors...

    Did find a spare board that had 2 .68k resistors on it. de-soldered those and ran them in a series just as they were configured on the board. here's how I figured out what they were according to the...
  3. The resistor above, referencing to a color code...

    The resistor above, referencing to a color code chart . Tolerance coefficient being gold or silver . this one has a silver band so the tolerance equals + or - 10 percent. with a yellow valued at 4...
  4. Yeah that's right, I am having trouble...

    Yeah that's right, I am having trouble distinguishing the o from the zero on the package, I have another resistor and its a stray one. I will figure out what it is before I try that one. The one I...
  5. super hard to read the package... so, aside from...

    super hard to read the package... so, aside from the inventory part. MFG>Name: VISHAY BC COMPONENTS . DESC: Resistor Metal Film, 1330km, 400mK, 12% resistance 133ohms, Resistance tolerance+- 12; ,...
  6. Issues wiring to factory tachometer "LS Swap"

    Ok I wired the P01 Green #10 wire to the tach signal wire on my 95 Volvo 940 and nothing happens on the tach. Drove by the shop this morning because I had a pack of resistors in my electrical cart,...
  7. Replies
    3
    Views
    410

    Completely neglected to delete vats when I...

    Completely neglected to delete vats when I re-flashed . This is all still in a stock original vehicle . It worked for me this time anyways.
  8. Replies
    3
    Views
    410

    The truck runs now, I could not find an XDF file...

    The truck runs now, I could not find an XDF file that matched my 03 file OS so I found a matching set and rewrote the OS and bin to some 04 files. It started up rough at first, no odometer or lights...
  9. Replies
    10
    Views
    1,003

    Yeah Finally figured out the issues that I had. I...

    Yeah Finally figured out the issues that I had. I flashed the ECM, went to explore files once I was able to get my pc to pair with my junk phone that I installed ls droid. Sent my tune with the 4l80...
  10. Replies
    3
    Views
    410

    Working on mystery issue truck.

    Tried to stick a computer back in the truck that was not changed but reflashed cranks but no start. The truck is a 2003 z71 Silverado with a 5.3. Currently ripping the O?S with lsDroid. The truck...
  11. Replies
    10
    Views
    1,003

    Ok so I flashed the first tune that I started...

    Ok so I flashed the first tune that I started with the 4l80 e and it started but stalled out , noticed a gas leak. Repaired gas leak but no throttle by wire, this might be the reason that it stalled....
  12. Replies
    10
    Views
    1,003

    Worked on it a little bit tonight hooked up the...

    Worked on it a little bit tonight hooked up the obdlinkLX to my phone and wrote OS# on the spare ECM that I have on the table with a sharpie. OS# 12597120 TBW P59 1MB . The tune I wrote the other...
  13. Replies
    10
    Views
    1,003

    I should be able to export the tune as a text...

    I should be able to export the tune as a text file and use the other program to reflash the ecu . Still waiting on the device to show up, if i have any luck with the bin file i will post it up. It...
  14. Replies
    10
    Views
    1,003

    Hooked up bluetooth adapter to see if it would...

    Hooked up bluetooth adapter to see if it would recognize the ELM327 . Nothing, will not connect to any device. Im about to scrap it and move on to something else. Car starts a litte i just need to...
  15. Replies
    10
    Views
    1,003

    Tried with elm327 powered up, phone recognizes it...

    Tried with elm327 powered up, phone recognizes it but computer does not. I'm finding that a tablet or better Samsung phone will actually connect , not sure about this pc. Who is using a WIFI...
  16. Replies
    10
    Views
    1,003

    Right, ok I understand all of that but what type...

    Right, ok I understand all of that but what type of cable or specific driver do we need to get this thing running? Or what current cable do we know works with TunerproRT? Could just be the driver...
  17. Replies
    10
    Views
    1,003

    Hardware not found, "Tunerpro R/T"

    Ok so far I have registered Tunerpro R/T and am able to read ECU's on a scan tool with my test harness powered up so that is working properly. I still have not been able to initialize hardware, I am...
  18. Replies
    2
    Views
    359

    If somebody could please PM me and let me know...

    If somebody could please PM me and let me know what is an acceptable photo/video hosting site that would be much appreciated.
  19. Replies
    2
    Views
    359

    Hi! Hows it goin.

    Just checking in. My name is Levi. I am an Industrial Maintenance Subcontractor. I have been super busy lately working for a local fabrication shop,; mostly in the oil and natural gas field. I have...
Results 1 to 19 of 19