So after buying an APU1 and running into hosts of other problems I ran into this thread:

http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1399-Setting-up-WB-in-the-ADX-editor

Looks...

Minor update:

With some extra time and a really nice day yesterday I dumped out my pile of decades old eproms and found a few 27C256s. With one of those I decided to flash the .bin from a 91 just...

Interesting. Although I don't have access to a Tech 2, please report back if you end up getting it to work.

A Tech 2 can't change the fuel total or curve on a 6.5, but it will allow you to initiate an TDC offset learn, which in combination with moving the pump might gain you a very slight performance...

So the value of 0x008 is 53.

If i was smart could I turn this eprom dump into the appropriate .adx file?

Wow, getting the eprom pulled out of that socket adapter was fun, what a ridiculous setup that is!

Eprom dump attached, it's a 27C128 with a Delco ANCZ 3741 ID sticker.

Hello all,

I've got an 88 S10 2.5L that I've shoehorned into a 57 Hillman Husky. I've got it running but a few things are not quite right and I'm attempting to log data. According to Mark's...

Given the 7080 is kinda an odd duck, and my future engine plans call for a bored TBI, chip programmer etc, for not that much more money I could move to something like a Holley Terminator EFI.

One...

One piece of additional info on the TCC issue. Today I tested lock-up manually by jumping F to A on the ALDL and the TCC instantly locked.

Any other thoughts on what else could be holding this...

Thought of another question. It appears that the 4L80E internal trans temp sensor is wired to D15 of the 7060 ECM. Is it possible to add this definition to the .adx file?

Probably also worth mentioning, I'm using the $85-16147060-V4.4.adx file when data logging.

Just started on this new project, 1991 2wd Burb with a 454, 4L80E etc. I've been wrenching for 20+ years and mostly a GM guy, but I am somewhat new to TBI ECM tinkering.

Truck has 140K miles,...

Currently fixing up a 1991 454 Burb. Found the community here while searching for data logging stuff. I'm currently using ALDLDroid and a Red Devil River interface.

A preemptive thanks to all...