Thanks, I'll check them out.
Type: Posts; User: Turnshredder
Thanks, I'll check them out.
That may work, is is hard to get the chip on and off. The on I have from Moates has a little lever, it is easy to get chip on and off.
This really Sucks, isn't the moates stuff the only thing we can use. How else could you burn or swap chips out without Moates. I got my 350 in my van running great with Tuner Pro, but how can we...
I never got it to work always goes to 14.7, I don't see how a narrow band sensor could read much different, I messed with all the qualifiers and tables.
Daveo91, you might be on to something there, I was just looking at the Tuner Pro website. I have a 1995 5.7 van. I have been using the OD mask. But I might be able to use the OE mask. I will...
I am using $0D, doesn't seem to be any choke tables, at least that work.
I am having the same problem, mine is running rich instead of lean though. Are you injectors big enough ? Does it run lean at WOT ?
Seems like you need a table that adjust the "choke" settings. ...
In Tuner Pro, XDF, 0D_TPV5_V250. "Stall Saver Activation Threshholds" These are Scalars you can mess with. These definetely caused mine to surge. my ADX is A217_0D_V250
How do you have your stall saver set ? This can make it surge.
I have messed with all of those tables alot to no success. I guess basically my open loop idle is rich too...of course as soon as it switched to closed loop it is fine.
I have to change my...
I am really happy with my tune, on my TBI now. It runs good in closed loop, or with the O2 sensor disconnected in Open Loop, WOT, cruise etc.
Problem is when it is cold, before it goes into closed...
14.7 is only for closed loop. I have tried to adjust mine to say 15.5 or 15 to 1, for better fuel economy, and it didn't seem to do anything. I did this under scalars/open loop afr...
Yep, very helpful
My van is a 1987, it is custom, I painted it twice, we burned up two 700r4's, which is one of the reasons I swapped every thing over to the 1995 stuff, for the 4l60e. I built up a pretty good 700r4...
This is awesome, I just found this thread, going to be studying it alot. I am doing a similar project. on my van now.
OK, thanks, will start doing that. It is a shame that he died also, God Bless him.
Oh also, Eagle Mark is the administrator. I submitted my request using Turnshredder with a Gmail account. Then later read that we don't like Gmail so I sent in another request, RadMotoVan using a...
First post: Rebuilding my 1987 Chevy van That I have used for motocross for about 20 years. Custom paint etc. This is the second time I rebuilt it. Rebuilt 305 20yrs ago. I just swapped...