something I had to do was remove all the altitude spark bias under scalars, make it 0. I live in Florida so no change pretty flat. I had no power popping like you said. Not sure if you tried that yet.
Type: Posts; User: typhoonss
something I had to do was remove all the altitude spark bias under scalars, make it 0. I live in Florida so no change pretty flat. I had no power popping like you said. Not sure if you tried that yet.
I have never seen a SA like that in any datalogs and I was datalogging the day before the icm went out. The only thing I notice is it gets harder for the motor to crank over or should say it's like...
One thing I think I have noticed over all 6 of these icm's failing is that it dosen't crank as fast when I start the truck for about a month before it dies. I just think it is very weird it is every...
sorry been out all weekend. The ICM's have been in the stock computer when it was a 5.0 and failed, in a very light modded 350 with a new distributer and failed and now in my modded 357 and failed....
Have a question for all you TBI lovers out there. I have had this truck for just over 6 years. once a year the Ignition control module goes bad, this is the 2nd time it has completely gone out where...
ok, I added 25% to the MAP PE at 80kpa I also added another degree to the PE - spark advance amount. The PE TPS enable I was not sure of are you talking about the "PE-Delta TPS". I also used the...
ty, will test tomorrow when I get a chance and let you know.
OK I have spent about 5 hours reading posts over the past 2 days and I have changed the spark table, added a little more at idle and some to the 60-100 map in the 1800-3200 range. I also added a...
off topic here is the touchscreen. I am also putting a 7in in the glovegox which will run a home automation linux system and also be a wireless router for sensors around the truck and leds. 1270612707
I have had this motor for almost a year as a daily driver now. I have for the most part drivability idle to 3200rpm with out knock and seems to run pretty good. Where my main issues are is it may...